L.S. Starrett Company (The)
Div Tool Division

CAGE Code: 57163

NCAGE Code: 57163

Status: Active

Type: Manufacturer

Dun & Bradstreet (DUNS): 001125681

CAGE 57163 L.S. Starrett Company (The) Div Tool Division
CAGE 57163 L.S. Starrett Company (The)

Summary

L.S. Starrett Company (The), Div Tool Division is an Active Manufacturer with the Cage Code 57163 and is tracked by Dun & Bradstreet under DUNS Number 001125681..

Address

121, Crescent Street
Athol MA 01331-1913
United States

Points of Contact

Telephone:
9782483231
Fax:
9782493699
L.S. Starrett Company (The) http://www.starrett.com/

Related Information

DUNS Report

Associated CAGE Codes People who viewed this 'CAGE Code' also viewed...

Mawb Wildland Management Services Whittaker Corp Duall/Wind Plastics Rouse Glen Painting Mallet, Lance Whipps Inc Jd Management Engineering Llc Dungan James R. J N M Software Llc Gray, Troy Gmg Precision Mfg Videomedia Poirier W Guide Lines Inc Polus Center For Social And Economic North Idaho Propane Inc Grief Recovery Institute, Inc Parks And Recreation Idaho Prometrics Software Inc Applied Power Intl Athol Machine And Foundry Co Advanced Research Development Inc

CAGE Code FAQ Frequently Asked Questions (FAQ) for CAGE 57163

What is CAGE Code 57163?
57163 is the unique identifier used by NATO Organizations to reference the physical entity known as L.S. Starrett Company (The) Div Tool Division located at 121, Crescent Street, Athol MA 01331-1913, United States.
Who is CAGE Code 57163?
57163 refers to L.S. Starrett Company (The) Div Tool Division located at 121, Crescent Street, Athol MA 01331-1913, United States.
Where is CAGE Code 57163 Located?
CAGE Code 57163 is located in Athol, MA, USA.
How Many NSNs Does CAGE Code 57163 Supply?
CAGE Code 57163 has been assigned as an approved source for 500 NSNs (National Stock Numbers and NATO Stock Numbers).

Contracting History for CAGE 57163 Contracting History for CAGE 57163 Most Recent 25 Records

FA821421P0002
Redesign And Purchase Of X Gage
29 Sep 2021
Fa8214 Afnwc Pzbb
Department Of Defense (Dod)
$214,144.00
FA226320C0004
Vision Measurement System
16 Jul 2020
Fa2263 Aflcmc Wnmk
Department Of Defense (Dod)
$804,700.00
FA226320C0004
Vision Measurement System
30 Apr 2021
Fa2263 Aflcmc Wnmk
Department Of Defense (Dod)
$866,850.00
FA226320C0004
Vision Measurement System
28 Jul 2020
Fa2263 Aflcmc Wnmk
Department Of Defense (Dod)
$804,700.00
FA226320C0004
Vision Measurement System
23 Sep 2020
Fa2263 Aflcmc Wnmk
Department Of Defense (Dod)
$804,700.00
N6833518P0037
Repair Of Vane Angle Fixture
7 Dec 2017
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$3,580.00
N6883618P0321
Igf::Ot::Igf Calibrate Hpt Lpt
15 May 2018
Navsup Flt Log Ctr Jacksonville
Department Of Defense (Dod)
$12,635.00
N6852021P0018
Change In Payment Office
4 Feb 2022
Fleet Readiness Center
Department Of Defense (Dod)
$27,104.00
SPMYM123P0936
N4215830043195
27 Apr 2023
Dla Maritime - Norfolk
Department Of Defense (Dod)
$20,163.00
N6852021P0018
To Change The Unit Of Issue From Each To Unit
15 Aug 2022
Fleet Readiness Center
Department Of Defense (Dod)
$27,104.00
N6833519P0340
Change Admin Dodaac From S0701a To N68335 And To Change Inspect At/Accept At Terms For All Clins To Destination/Destination.
27 Jul 2020
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$41,268.00
N6852023P0099
V Alignment Fixture S07750h
20 Jul 2023
Fleet Readiness Center
Department Of Defense (Dod)
$37,290.00
N6833519P0340
Admin Mod To V Alignment Fixture Repair
16 Sep 2019
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$4,000.00
N6852021P0018
Repair V Alignment
3 Aug 2021
Fleet Readiness Center
Department Of Defense (Dod)
$27,104.00
N6833519P0340
Tt&E V Alignament Fixtures
5 Sep 2019
Dcma Eastern Regional Command
Department Of Defense (Dod)
$4,000.00
N6833519P0340
Technical Teardown And Evaluation - V Alignment Fixture
9 Aug 2019
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$4,000.00
N6833519P0340
Tt&E V Alignament Fixtures
6 Jun 2019
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$4,000.00
FA813220P0039
Starrett Angle Gage Repair
22 May 2020
Fa8132 Afsc Pzimc
Department Of Defense (Dod)
$3,388.00
N6833517P0507
Angle Checking Fixture
8 Aug 2017
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$137,772.00
N6833519P0340
V Alignment Fixture Repairs
17 Sep 2020
Navair Warfare Ctr Aircraft Div
Department Of Defense (Dod)
$41,268.00
N6833519P0340
Repair V Alignment Fixture
30 Mar 2020
Navair Warfare Ctr Aircraft Div Lke
Department Of Defense (Dod)
$31,104.00

NSN by CAGE Code Supply Items Approved for CAGE 57163 Page 1 of 1

5210-00-261-5845
Standard End Measuring Rod
234A-6
RNCC: 3 | RNVC: 2 | DAC: 4
50979
RNCC: 5 | RNVC: 2 | DAC: 4
1 Jan 1963
5220-01-080-9360
Profile Gage
905564-5
RNCC: 5 | RNVC: 2 | DAC: 4
4 Aug 1979
5210-00-230-7838
Gage Block
SS7.000A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
5220-00-232-6409
Parallel
81680
RNCC: 5 | RNVC: 2 | DAC: 4
24 Dec 1971
5210-01-071-6034
Dial Indicating Thickness Gage
905718
RNCC: 3 | RNVC: 2 | DAC: 4
10 Feb 1979
5210-01-008-8121
Micrometer Head
663R
RNCC: 3 | RNVC: 2 | DAC: 4
30 Aug 1975
5210-00-324-1541
Bench Level
97
RNCC: 5 | RNVC: 1 | DAC: 4
97-6
RNCC: 3 | RNVC: 2 | DAC: 4
50434
RNCC: 5 | RNVC: 2 | DAC: 4
97-6IN
RNCC: 5 | RNVC: 2 | DAC: 4
1 Jan 1963
5210-00-230-2429
Gage Block
SS.022A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
5210-00-081-4496
Micrometer Head
263L
RNCC: C | RNVC: 1 | DAC: 5
263LSILVERPLATED
RNCC: 5 | RNVC: 2 | DAC: 4
6 Jan 1973
5210-21-886-4449
Outside Caliper
79B-3
RNCC: 3 | RNVC: 2 | DAC: 4
4 Aug 1981
5210-01-156-3894
Gage Block Set
RCS81AX
RNCC: 3 | RNVC: 2 | DAC: 4
20 Jun 1983
5120-21-874-2491
Machinist's Scriber
70B
RNCC: 3 | RNVC: 2 | DAC: 1
26 Apr 1977
5210-21-104-9651
Outside Micrometer Caliper
436MRL-250
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-849-9751
Outside Caliper
26-36
RNCC: 3 | RNVC: 2 | DAC: 4
2 Aug 1968
5210-21-801-6359
Machinist's Rule
303R
RNCC: 3 | RNVC: 2 | DAC: 6
5 Feb 1964
5210-21-878-4058
Measuring Tape
HC530ME-15M
RNCC: 3 | RNVC: 2 | DAC: 4
C530ME
RNCC: 5 | RNVC: 9 | DAC: 4
HC530ME
RNCC: 5 | RNVC: 9 | DAC: 4
13 Jun 1978
5210-21-899-4194
Dial Indicat Holder
657TW
RNCC: 3 | RNVC: 2 | DAC: 6
657TL
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1985
5210-21-638-0128
Micrometer Depth Gage
445BZ-3RL
RNCC: 3 | RNVC: 2 | DAC: 4
445AZ-3RL
RNCC: 5 | RNVC: 9 | DAC: 4
9 Jun 1964
5120-21-906-2125
Drive Pin Punch Set
S565PC
RNCC: 5 | RNVC: 2 | DAC: 4
52587
RNCC: 5 | RNVC: 2 | DAC: 4
14 Dec 1990
5210-21-638-0089
Outside Micrometer Caliper
436MRL-25
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-17-701-3423
Thickness Gage Stock
666M0-03X13X8000
RNCC: 6 | RNVC: 9 | DAC: 9
30 Apr 1974
5210-21-105-1272
Planer Gage
599
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-879-9779
Telescoping Gage
229E
RNCC: 3 | RNVC: 2 | DAC: 4
24 Apr 1979
5120-21-903-2769
Swivel Knob Jeweler's Screwdriver Set
S555Z-6
RNCC: 3 | RNVC: 2 | DAC: 4
15 Sep 1987
5210-21-104-9657
Thread Micrometer Caliper
575FP
RNCC: 3 | RNVC: 2 | DAC: 3
6 Jun 1968
5210-21-886-9582
Combination Square
C434-12-16R
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-98-102-0819
Vernier Caliper
122-12IN
RNCC: 3 | RNVC: 2 | DAC: 3
5 Jun 1973
5210-21-638-0250
Machinist's Rule
607R-6
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0101
Tube Micrometer Caliper
576R
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-21-887-9618
Thickness Gage Stock
666-5
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-66-036-3728
Outside Micrometer Caliper
436RLZ10
RNCC: 3 | RNVC: 2 | DAC: E
29 Jun 1970
5210-21-638-0057
Inside Micrometer Caliper
124AZ
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-17-701-3253
Houder
806
RNCC: 6 | RNVC: 9 | DAC: 9
26 Mar 1963
5210-21-896-6942
Optical Flat
OFD5R
RNCC: 3 | RNVC: 2 | DAC: 6
2 Sep 1984
5210-21-894-0016
Height Gage
CP454MEZ-450
RNCC: 3 | RNVC: 2 | DAC: 4
7 Aug 1983
5210-98-103-3623
Micrometer Depth Gage
445C-3RL
RNCC: 5 | RNVC: 2 | DAC: 9
1 Jun 1990
5210-21-882-9766
Vernier Height Gage
254EMZ-12 AND 454H
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1980
5210-21-105-2784
Combination Square
11HC-6-4R
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-21-885-0961
Outside Micrometer Caliper Set
S436MCRLSZ
RNCC: 3 | RNVC: 2 | DAC: 4
18 Mar 1981
5210-21-872-0306
Machinist's Rule
604R-12
RNCC: 3 | RNVC: 2 | DAC: 4
22 Apr 1975
5210-66-013-5709
Inside Caliper
73B-6
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-105-1275
Screw Pitch Gage
159M
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-883-4435
Gage Block Set
RS 112 MA1 SPECIAL
RNCC: 5 | RNVC: 9 | DAC: 4
3 Dec 1980
5120-21-877-4886
Solid Center Punch
117E
RNCC: 3 | RNVC: 2 | DAC: 4
21 Mar 1978
5210-99-136-2053
Trammel
C251C
RNCC: 3 | RNVC: 2 | DAC: 4
25 Apr 1991
5210-17-007-1011
Outside Micrometer Caliper
436RL1-2
RNCC: 6 | RNVC: 9 | DAC: 9
16 Jun 1972
5210-21-888-4796
Outside Micrometer Caliper
230XFL
RNCC: 3 | RNVC: 2 | DAC: 4
27 Feb 1982
5210-00-150-2853
Micrometer Head
663L
RNCC: 3 | RNVC: 2 | DAC: 4
17 Jun 1970
5120-21-872-1476
Drive Pin Punch
565A
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5210-21-638-0052
Outside Caliper
275-6
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5120-21-876-2789
Swivel Knob Jeweler's Screwdriver
555C
RNCC: 3 | RNVC: 2 | DAC: 1
27 Sep 1977
3460-66-068-4375
Hole Saw Arbor
A6
RNCC: 3 | RNVC: 2 | DAC: E
25 Mar 1975
5210-21-892-0259
Micrometer Depth Gage
445BZ-9RL
RNCC: 3 | RNVC: 2 | DAC: 4
10 Jan 1983
5210-21-849-9224
Inside Caliper
37-18
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-00-912-0012
Blade
364A4780
RNCC: 3 | RNVC: 2 | DAC: 3
1 Jan 1960
5210-00-460-5482
Micrometer Head
63P
RNCC: 3 | RNVC: 2 | DAC: 4
7 Jan 1970
5210-21-638-0091
Outside Micrometer Caliper
436MRL-125
RNCC: 3 | RNVC: 2 | DAC: 4
436MRL
RNCC: 5 | RNVC: 9 | DAC: 4
25 May 1968
5210-00-451-7092
Micrometer Head
T463L
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1971
5210-21-878-4121
Outside Micrometer Caliper
T226RL-5
RNCC: 3 | RNVC: 2 | DAC: 4
T226RL
RNCC: 5 | RNVC: 9 | DAC: 4
13 Jun 1978
5220-00-420-5582
Inspecti Gage Block
900921-3
RNCC: 3 | RNVC: 2 | DAC: 5
7 Mar 1969
5210-00-919-8798
Balance Wheel Caliper
S154L
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5210-00-989-5429
Dial Indicator
81-111S
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1962
5210-00-253-0879
Bevel Mechanics Protractor
C364BZ
RNCC: 3 | RNVC: 2 | DAC: 4
364B
RNCC: 5 | RNVC: 9 | DAC: X
1 Jan 1960
5210-00-027-0153
Micrometer Head
T1263RL
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1961
5210-21-807-1097
Dial Indicator
25G
RNCC: 3 | RNVC: 1 | DAC: 6
5 Feb 1964
5210-21-852-9862
Telescoping Gage Set
S579G
RNCC: 3 | RNVC: 2 | DAC: 6
24 Feb 1969
5210-21-638-0318
Fillet And Radius Gage
272A
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-859-0880
Machinist's Scriber
67
RNCC: 3 | RNVC: 1 | DAC: 6
18 Jun 1970
5210-21-895-1699
Thickness Gage
66
RNCC: 3 | RNVC: 2 | DAC: 4
20 Feb 1984
5210-21-886-5091
Vernier Caliper
120MZ-150
RNCC: 3 | RNVC: 2 | DAC: 4
14 Sep 1981
5210-21-879-8094
Outside Micrometer Caliper
224AARL
RNCC: 3 | RNVC: 1 | DAC: 4
2 Jan 1979
5210-21-899-3670
Outside Micrometer Caliper
436RL-6
RNCC: 3 | RNVC: 2 | DAC: 4
26 Apr 1985
5210-21-801-6331
Telescoping Gage
229C
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-105-2460
Machi Scriber Point
68
RNCC: 5 | RNVC: 1 | DAC: 6
1769
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-638-0388
Surface Gage
257D18
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-879-8100
Micrometer Anvil
99036
RNCC: 3 | RNVC: 2 | DAC: 6
2 Jan 1979
5210-21-109-8530
Standard End Measuring Rod
234A-7
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-66-019-0077
Outside Micrometer Caliper
436MRL50
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-907-6458
Measuring Tape
SCK125
RNCC: 3 | RNVC: 2 | DAC: 6
15 May 1990
5120-21-639-5484
Solid Center Punch
117B
RNCC: 5 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-800-6851
Outside Caliper
75B-3
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-21-807-1249
Sleeve Attachment
196L
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-01-142-3126
Dial Indicator Set
S253Z
RNCC: 3 | RNVC: 2 | DAC: 4
51218
RNCC: 5 | RNVC: 2 | DAC: 4
14 Nov 1982
5210-01-008-8120
Surface Gage
257C
RNCC: 3 | RNVC: 2 | DAC: 4
30 Aug 1975
5210-21-894-4911
Height Gage And Dep
289C
RNCC: 3 | RNVC: 2 | DAC: 4
7 Jan 1984
5210-01-058-7482
Dial Indicator
25-111
RNCC: 5 | RNVC: 2 | DAC: 4
1 Apr 1978
5210-01-015-1605
Micrometer Head
T63PX
RNCC: 3 | RNVC: 2 | DAC: 4
15 Jan 1976
5210-00-230-2440
Gage Block
SS.050A1
RNCC: 3 | RNVC: 2 | DAC: 4
1 Jan 1963
6650-00-239-9224
Polygon Stee Mirror
DAFT721
RNCC: 3 | RNVC: 2 | DAC: 5
31 Oct 1969
5120-01-095-4323
Flat Tip Screwdriver
559A
RNCC: 3 | RNVC: 2 | DAC: 4
30 May 1980
5110-21-639-6103
Hand Hacksaw Blade
H1232
RNCC: 5 | RNVC: 2 | DAC: 6
9 Jun 1964
5210-21-638-0097
Outside Micrometer Caliper
224CRL
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
9510-21-887-5912
Metal Bar
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-21-879-9778
Telescoping Gage
229D
RNCC: 3 | RNVC: 2 | DAC: 4
24 Apr 1979
9510-21-887-5907
Metal Bar
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-21-907-6144
Measuring Tape
SCK25ME
RNCC: 3 | RNVC: 2 | DAC: 6
27 Oct 1989
3455-66-070-3813
Hole Saw Blade
H0500
RNCC: 3 | RNVC: 2 | DAC: E
2 Aug 1974
5210-21-887-9622
Thickness Gage Stock
666-10
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-21-638-0327
Straightedge
385-24
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-21-902-1494
Port Dial Indicator
1015B
RNCC: 3 | RNVC: 2 | DAC: 4
21 Oct 1986
5210-21-638-0334
Dial Indicating Crankshaft Distortion Gage
696Z
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-807-1262
Double Square
13B
RNCC: 3 | RNVC: 2 | DAC: 4
1 Feb 1965
5120-21-639-3411
Swivel Knob Jeweler's Screwdriver
555C
RNCC: 3 | RNVC: 1 | DAC: 6
6 Jun 1968
5210-21-805-0960
Outside Micrometer Caliper Set
ST436ERLSZ
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-638-0203
Dial Indicator
196A1Z
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
3460-21-893-9190
Machine Table Vise
1026C
RNCC: 3 | RNVC: 2 | DAC: 4
27 Aug 1983
5210-21-105-2785
Combination Square
11HC
RNCC: 3 | RNVC: 1 | DAC: 6
4 Jun 1968
5210-21-109-8532
Standard End Measuring Rod
234A-9
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
3460-21-893-9189
Machine Table Vise
1024C
RNCC: 3 | RNVC: 2 | DAC: 4
27 Aug 1983
5210-21-849-8441
Outside Micrometer Caliper
2ARLZ
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5120-21-872-1479
Drive Pin Punch
565D
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5210-21-902-1410
Gage Block Set
RS9.A1
RNCC: 3 | RNVC: 2 | DAC: 4
1 Oct 1986
5210-01-024-2057
Hook Rule
DH604R
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jul 1976
5210-00-925-4252
Telescoping Gage Set
S579HZ
RNCC: 3 | RNVC: 2 | DAC: 5
52617
RNCC: 5 | RNVC: 2 | DAC: 4
24 Jan 1966
5210-01-159-2272
Rule Case
1612
RNCC: 3 | RNVC: 2 | DAC: 4
4 Aug 1983
5210-00-820-5082
Taper Gage
270
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1962
5210-01-008-7984
Measuring Instrument Contact Point
17
RNCC: 3 | RNVC: 2 | DAC: 4
6632/17
RNCC: 5 | RNVC: 2 | DAC: 4
70804
RNCC: 5 | RNVC: 2 | DAC: 4
30 Aug 1975
5210-01-043-2299
Micrometer Head
1463P
RNCC: 3 | RNVC: 2 | DAC: 4
22 Jun 1977
5210-00-912-0484
Vernier Plate
364-1195
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5210-01-088-6584
Standard End Measuring Rod
234A-6IN
RNCC: 3 | RNVC: 2 | DAC: 4
17 Jan 1980
5220-01-080-8182
Profile Gage
905481-4
RNCC: 5 | RNVC: 2 | DAC: 4
2 Aug 1979
5210-01-035-1334
Gage Block
RS.1002AA
RNCC: 3 | RNVC: 2 | DAC: 4
4 Feb 1977
5210-01-021-2438
Gage Block
RS.10005AA
RNCC: 3 | RNVC: 2 | DAC: 4
10 May 1976
5210-00-704-4675
Gage Block
SS8.000AA
RNCC: 3 | RNVC: 2 | DAC: 4
12 Feb 1968
5210-00-150-2541
Dial Indicator
25-134
RNCC: 3 | RNVC: 2 | DAC: 4
24 Apr 1970
5340-00-912-0478
Clamp
364C4782
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5340-00-912-0481
Clamp
364E4782
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5340-00-912-0486
Clamp
364G99067
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5120-00-279-2214
Screw Jack Extension Base
191B
RNCC: 3 | RNVC: 2 | DAC: 4
8 Aug 1973
5210-00-956-5769
Thickness Gage Blade
667
RNCC: 5 | RNVC: 1 | DAC: 4
667-018
RNCC: 3 | RNVC: 2 | DAC: 4
1 Jan 1962
5210-00-003-7532
Gage Block Set
SCAA
RNCC: 3 | RNVC: 2 | DAC: 6
26 May 1972
5210-00-912-0013
Blade
364C4781
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
1560-12-029-5680
Contact Point
C0NTACTP0INT
RNCC: 3 | RNVC: 2 | DAC: 5
30 May 1969
5120-21-105-3267
Machinist's Vise
923A
RNCC: 3 | RNVC: 2 | DAC: 4
25 May 1968
5120-21-872-0445
Automatic Center Punch
18AA
RNCC: 3 | RNVC: 2 | DAC: 4
22 Apr 1975
5210-21-899-3671
Outside Micrometer Caliper
436RL-5
RNCC: 3 | RNVC: 2 | DAC: 4
26 Apr 1985
5210-21-893-3728
Machinist's Rule
310K-6
RNCC: 3 | RNVC: 2 | DAC: 4
1 May 1983
3460-21-871-9419
Machine Table Vise
913 1/2
RNCC: 3 | RNVC: 2 | DAC: 2
30 Aug 1977
5210-21-886-9752
Dial Indicator Back
672-2
RNCC: 3 | RNVC: 2 | DAC: 4
23 Nov 1981
5110-21-859-0556
Hand Hacksaw Blade
RS1232
RNCC: 3 | RNVC: 2 | DAC: 4
14 May 1970
3455-21-904-1328
Metal Cutting Band Saw Blade
13965
RNCC: 3 | RNVC: 2 | DAC: 4
11 Mar 1988
5120-21-105-2459
Machi Scriber Point
67
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5120-21-872-1480
Drive Pin Punch
565E
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5210-21-638-0087
Outside Micrometer Caliper
T230RL
RNCC: 3 | RNVC: 1 | DAC: 4
8 Apr 1964
5210-21-894-0012
Thickness Gage
172MBT
RNCC: 3 | RNVC: 2 | DAC: 4
7 Aug 1983
5220-99-469-9329
Adjus Parallel Slip
154B
RNCC: 6 | RNVC: 9 | DAC: 9
25 Apr 1991
5210-21-638-0094
Outside Micrometer Caliper
224AARLZ
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
9515-21-887-5903
Metal Strip
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-66-036-3733
Outside Micrometer Caliper
436RL4
RNCC: 3 | RNVC: 2 | DAC: E
29 Jun 1970
5120-21-639-9952
Solid Center Punch Set
S264WB
RNCC: 3 | RNVC: 2 | DAC: 1
6 Jun 1968
5210-66-019-0078
Outside Micrometer Caliper
436MRL75
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-638-0138
Fillet And Radius Gage
272B
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-639-3413
Swivel Knob Jeweler's Screwdriver
555E
RNCC: 3 | RNVC: 1 | DAC: 6
6 Jun 1968
5210-21-638-0412
Outside Micrometer Caliper
436XRL-6
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-25-105-8475
Vernier Height Gage
354
RNCC: 3 | RNVC: 2 | DAC: 5
1 Jan 1984
5110-21-851-2530
End Cutting Nippers
1X
RNCC: 3 | RNVC: 1 | DAC: 6
2 Aug 1968
5210-21-893-3953
Small Hole Gage Set
S830FZ
RNCC: 3 | RNVC: 2 | DAC: 4
7 May 1983
6850-21-572-4630
Layout Dye
1610-16
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-905-8580
Machinist's Rule
C305R-12
RNCC: 3 | RNVC: 2 | DAC: 4
22 Apr 1989
5210-21-807-6044
Inside Caliper
74B-4
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5120-21-879-8607
Spanner And Wrench
224AARL
RNCC: 3 | RNVC: 1 | DAC: 4
2 Jan 1979
5120-21-872-1477
Drive Pin Punch
565B
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5220-21-104-9620
Toolmakers Buttons
494A
RNCC: 3 | RNVC: 2 | DAC: 6
4 Jun 1968
5210-21-638-0279
Try Square
20-18Z
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-00-081-4272
Micrometer Head
463L
RNCC: 3 | RNVC: 2 | DAC: 4
15 Dec 1972
5210-21-885-1352
Gage Block Set
RC112MAA
RNCC: 3 | RNVC: 2 | DAC: 6
31 Mar 1981
5210-66-019-0079
Outside Micrometer Caliper
436MRL100
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-638-0373
Inside Micrometer Caliper
823BZ
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0261
Combination Square
11H-12-4R
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-638-0099
Outside Micrometer Caliper
224ERLZ
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0110
Mechanics' Dividers
83A-6
RNCC: 3 | RNVC: 2 | DAC: 6
4 Jun 1968
5210-21-638-0111
Mechanics' Dividers
83A-8
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-21-886-4790
Vernier Height Gage
454EMZ-24
RNCC: 3 | RNVC: 2 | DAC: 4
31 Aug 1981
5210-21-638-0011
Inside Caliper
27-6
RNCC: 3 | RNVC: 2 | DAC: 4
27
RNCC: 5 | RNVC: 9 | DAC: 6
6 Jun 1968
5210-21-897-5823
Outside Micrometer Caliper
436RL-3
RNCC: 3 | RNVC: 2 | DAC: 4
14 Oct 1984
5210-21-800-6852
Standard End Measuring Rod
234A-1
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
1 Feb 1965
5210-21-874-2191
Level And Plumb
132-12
RNCC: 3 | RNVC: 2 | DAC: 4
26 Apr 1977
5210-12-141-6656
Telescoping Gage
579A
RNCC: 3 | RNVC: 2 | DAC: 5
30 May 1969
5210-21-811-0205
Micrometer Depth Gage
445AZ9RL
RNCC: 3 | RNVC: 2 | DAC: 4
28 Oct 1963
3460-66-064-6925
Hole Saw Arbor
A3
RNCC: 3 | RNVC: 2 | DAC: E
14 May 1977
3460-66-064-6933
Straight Shank Tool Socket
MA02
RNCC: 3 | RNVC: 2 | DAC: E
15 Jul 1975
5210-21-879-9771
Vernier Caliper
123EMZ-6
RNCC: 3 | RNVC: 2 | DAC: 4
122EM
RNCC: 5 | RNVC: 9 | DAC: 4
24 Apr 1979
5210-21-907-7125
Fillet And Radius Gage
178A
RNCC: 3 | RNVC: 2 | DAC: 4
22 Jan 1991
5210-66-019-0081
Outside Micrometer Caliper
436MRL150
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5120-21-872-1478
Drive Pin Punch
565C
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
9515-21-887-5902
Metal Strip
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-21-866-8702
Combination Square Square And Miter Head
H33-4
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jun 1972
5210-21-105-1581
Combination Square Protractor Head
490
RNCC: 5 | RNVC: 1 | DAC: 4
PR1224W
RNCC: 3 | RNVC: 2 | DAC: 4
PR1224
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5120-21-879-9239
Tap And Reamer Wrench
93B
RNCC: 3 | RNVC: 2 | DAC: 4
19 Jun 1979
5210-21-894-0020
Fillet And Radius Gage
S167MCHZ
RNCC: 3 | RNVC: 2 | DAC: 4
7 Aug 1983
5210-21-878-4168
Thread Micrometer Caliper
585APZ
RNCC: 3 | RNVC: 2 | DAC: 4
30 May 1978
5210-21-638-0041
Outside Caliper
38-6
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-810-0040
Outside Caliper
79A-8
RNCC: 3 | RNVC: 2 | DAC: 4
29 Aug 1964
5210-21-104-9886
Stair Gage Fixtures
470
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5120-21-639-5483
Solid Center Punch
117A
RNCC: 5 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-878-4118
Outside Micrometer Caliper
T226RLZ2
RNCC: 3 | RNVC: 2 | DAC: 4
T226RL
RNCC: 5 | RNVC: 9 | DAC: 4
13 Jun 1978
5210-13-103-0518
Machinist's Steel Rule
C604RE12IN
RNCC: 3 | RNVC: 2 | DAC: 6
1 Apr 1975
5210-21-849-6422
Mic Ball Attachment
247A
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-878-4165
Thread Micrometer Caliper
575BPZ
RNCC: 3 | RNVC: 2 | DAC: 4
30 May 1978
5210-21-866-8703
Combination Square Center Head
C33-4
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jun 1972
3460-66-014-5157
Toolmaker's Parallel Clamp
161E
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-799-6764
Outside Micrometer Caliper
724LZ-24
RNCC: 3 | RNVC: 2 | DAC: 4
724L
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-66-026-3773
Outside Micrometer Caliper
436RL6
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-66-055-3840
Outside Micrometer Caliper
T436RL6
RNCC: 3 | RNVC: 2 | DAC: E
7 Oct 1972
5210-21-849-8489
Screw Pitch Gage
475
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-900-0841
Dial Indicator
655-118P
RNCC: 3 | RNVC: 2 | DAC: 4
5 Nov 1985
5110-21-848-2358
Round Hacksaw Blade
X1200
RNCC: 5 | RNVC: 2 | DAC: 6
17 Oct 1967
5210-66-013-8296
Thickness Gage Blade
667-10
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-21-638-0436
Standard End Measuring Rod
234A-16
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-12-141-6661
Telescoping Gage
579F
RNCC: 3 | RNVC: 2 | DAC: 5
30 May 1969
5210-21-105-1778
Level And Plumb
132-9
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-801-6361
Machinist's Rule
320
RNCC: 3 | RNVC: 1 | DAC: 6
310R
RNCC: 5 | RNVC: 1 | DAC: 6
5 Feb 1964
5210-21-847-6505
Measuring Tape
C504-240
RNCC: 3 | RNVC: 2 | DAC: 3
4 Jun 1968
5120-21-639-5875
Machinist's Scriber
70A
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-801-6329
Telescoping Gage
229A
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-859-2244
Pin Vise
S240C
RNCC: 3 | RNVC: 1 | DAC: 6
18 Jun 1970
5210-21-105-2351
Machinist's Rule
C604R-18
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-880-9558
Measuring Tape
W530ME-10M
RNCC: 3 | RNVC: 2 | DAC: 4
530ME
RNCC: 5 | RNVC: 9 | DAC: 4
4 Dec 1979
5210-99-910-6415
Combination Square
434 ME-300
RNCC: 3 | RNVC: 2 | DAC: 4
25 Apr 1991
5110-21-806-0389
Hand Cable Stripper
1X
RNCC: 3 | RNVC: 1 | DAC: 4
6 Jun 1968
5210-21-893-3960
Thickness Gage
72M
RNCC: 3 | RNVC: 2 | DAC: 4
14 May 1983
3455-21-815-2716
Power Hacksaw Blade
RS1406-6
RNCC: 3 | RNVC: 2 | DAC: 6
13 Jun 1964
5210-21-807-1264
Vernier Attachment
454C
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-844-6008
Micrometer Head
263RL
RNCC: 3 | RNVC: 2 | DAC: 4
17 Oct 1966
5210-21-844-4558
Machinist's Rule
C305R-24
RNCC: 3 | RNVC: 2 | DAC: 4
29 Aug 1966
5210-21-842-7758
Twist Drill Gage
198
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-887-9614
Thickness Gage Stock
666-1 1/2
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-21-880-6774
Measuring Tape
SCK10ME
RNCC: 3 | RNVC: 2 | DAC: 6
21 Aug 1979
9510-21-887-5906
Metal Bar
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-21-105-2787
Diemaker's Square
453E
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0024
Inside Caliper
73A-12
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0082
Outside Micrometer Caliper
230RLZ
RNCC: 3 | RNVC: 2 | DAC: 4
25 May 1968
5120-21-639-5482
Solid Center Punch
117AA
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-21-638-0241
Machinist's Rule
C604R-4
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
3455-66-070-3804
Hole Saw Blade
H0278
RNCC: 3 | RNVC: 2 | DAC: 4
11 Aug 1974
5210-21-872-0505
Double Square
13F
RNCC: 3 | RNVC: 2 | DAC: 4
29 Apr 1975
5210-21-879-9777
Telescoping Gage
229C
RNCC: 3 | RNVC: 2 | DAC: 4
24 Apr 1979
5210-21-809-8669
Outside Caliper
75B-6
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5120-21-639-5478
Drive Pin Punch
248E
RNCC: 3 | RNVC: 2 | DAC: 6
1 Feb 1965
5210-21-799-6763
Outside Micrometer Caliper
724LZ-18
RNCC: 3 | RNVC: 2 | DAC: 4
724L
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5120-21-799-1096
Screwdriver Bit
PT2449C
RNCC: 3 | RNVC: 1 | DAC: 2
6 Jun 1968
5210-21-874-2192
Level And Plumb
132-9
RNCC: 3 | RNVC: 2 | DAC: 4
26 Apr 1977
5210-21-894-0440
Dial Indicat Holder
659BZ
RNCC: 3 | RNVC: 2 | DAC: 4
27 Aug 1983
5210-21-807-1257
Vernier Height Gage
P354-6
RNCC: 3 | RNVC: 1 | DAC: 6
5 Feb 1964
5210-21-105-2871
Straightedge
385-72
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0141
Vernier Height Gage
454-12
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-21-886-9585
Mechanics' Dividers
92-9
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-21-879-8098
Micrometer Anvil
99034
RNCC: 3 | RNVC: 2 | DAC: 6
2 Jan 1979
5210-21-105-2326
Tinsmiths Rule
471
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-908-2021
Small Hole Gage
831D
RNCC: 3 | RNVC: 2 | DAC: 4
5 Mar 1991
5210-21-109-6454
Dial Indicator
645A5Z
RNCC: 3 | RNVC: 2 | DAC: 4
645A
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-21-801-0479
Dial Indicating Thickness Gage
654PZ
RNCC: 3 | RNVC: 2 | DAC: 4
654
RNCC: 5 | RNVC: 9 | DAC: 4
5 Feb 1964
5210-21-892-0247
Outside Micrometer Caliper
V436MRLZ-50
RNCC: 3 | RNVC: 2 | DAC: 4
2 Jan 1983
5110-21-906-1465
Hand Hacksaw Blade
SF1232
RNCC: 3 | RNVC: 2 | DAC: 4
29 Sep 1989
5210-21-638-0083
Outside Micrometer Caliper
2RL
RNCC: 3 | RNVC: 2 | DAC: 4
25 May 1968
4910-14-492-8596
Micr Caliper
224GRL
RNCC: 3 | RNVC: 2 | DAC: 6
8 Oct 1997
5210-21-892-0248
Outside Micrometer Caliper
436RLZ-2
RNCC: 3 | RNVC: 2 | DAC: 4
2 Jan 1983
5210-21-895-1705
Inside Caliper
73B-3
RNCC: 3 | RNVC: 2 | DAC: 4
20 Feb 1984
5210-21-879-8096
Standard End Measuring Rod
234A-2
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
2 Jan 1979
5210-21-638-0408
Outside Micrometer Caliper
436XRL-2
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-105-3277
Pin Vise
165
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-105-1288
Gage Block Set
RS84A1
RNCC: 5 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-801-6357
Machinist's Rule
C636-300
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-21-879-9774
Outside Caliper
75B-6
RNCC: 3 | RNVC: 2 | DAC: 4
24 Apr 1979
5120-21-853-6897
Machinist's Vise
925A
RNCC: 3 | RNVC: 2 | DAC: 4
23 May 1969
5210-21-801-0521
Standard End Measuring Rod
234A-6
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
27 Sep 1966
5210-66-055-3850
Outside Micrometer Caliper
T436RLZ9
RNCC: 3 | RNVC: 2 | DAC: E
7 Oct 1972
5210-21-878-4119
Outside Micrometer Caliper
T226RLZ-3
RNCC: 3 | RNVC: 2 | DAC: 4
T226RL
RNCC: 5 | RNVC: 9 | DAC: 4
13 Jun 1978
5120-21-639-5485
Solid Center Punch
264D
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0095
Outside Micrometer Caliper
224ARLZ
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5120-21-639-5505
Nail Set
176A
RNCC: 3 | RNVC: 1 | DAC: 6
116D
RNCC: 3 | RNVC: 2 | DAC: 6
4 Jun 1968
5210-21-896-6685
Slide Caliper
425ME-130
RNCC: 3 | RNVC: 2 | DAC: 4
425MANDE
RNCC: 5 | RNVC: 9 | DAC: 4
12 Aug 1984
5210-21-638-0361
Vernier Caliper
122EM-24
RNCC: 3 | RNVC: 2 | DAC: 4
122EM
RNCC: 5 | RNVC: 9 | DAC: 6
22 May 1968
5210-21-840-0484
Vernier Height Gage
254Z-18
RNCC: 3 | RNVC: 2 | DAC: 4
19 May 1965
5210-21-886-0833
Dial Indicator
665MJZ
RNCC: 3 | RNVC: 2 | DAC: 4
9 Jun 1981
5210-21-638-0132
Rule Depth Gage
236
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
3460-21-893-9224
Matched V-Block Set
568C
RNCC: 3 | RNVC: 2 | DAC: 4
52592
RNCC: 5 | RNVC: 2 | DAC: 4
3 Sep 1983
5210-21-902-1294
Tube Micrometer Caliper
569AP
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1986
8030-21-897-6813
Corrosion Preventive Compound
M-1.25
RNCC: 3 | RNVC: 2 | DAC: 4
12 Dec 1984
3455-21-903-2030
Metal Cutting Band Saw Blade
POWERBAND-M2
RNCC: 3 | RNVC: 1 | DAC: 2
23 Sep 1987
3460-21-640-0173
Matched V-Block Set
268C
RNCC: 3 | RNVC: 2 | DAC: 6
26 Jun 1967
7510-21-893-6035
Metallic Ruler
310K6
RNCC: 3 | RNVC: 2 | DAC: 6
14 May 1983
5210-01-266-2918
Dial Indicator
656-128J
RNCC: 3 | RNVC: 2 | DAC: 4
53668
RNCC: 5 | RNVC: 2 | DAC: 4
23 Oct 1987
5210-00-230-2437
Gage Block
SS.030A1
RNCC: 3 | RNVC: 2 | DAC: 4
8 Aug 1969
5210-00-230-7824
Gage Block
SS.020A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
6635-01-212-3969
Electronic Runout Machine
907720
RNCC: 3 | RNVC: 2 | DAC: B
11 Jul 1985
5210-01-460-4818
Combination Square
435-12-16R
RNCC: 3 | RNVC: 2 | DAC: 4
5 Nov 1998
5210-21-801-6363
Small Hole Gage Set
S829EZ
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-01-272-8677
Outside Micrometer Caliper
T230XRL
RNCC: 3 | RNVC: 2 | DAC: 4
50944
RNCC: 5 | RNVC: 2 | DAC: 4
16 Feb 1988
5210-01-224-4893
Micrometer Head
463P
RNCC: 3 | RNVC: 2 | DAC: 4
17 Jan 1986
5210-01-266-7523
Outside Micrometer Caliper
486P-2
RNCC: 5 | RNVC: 2 | DAC: 4
30 Oct 1987
5210-01-446-5316
Dial Indicator
811-5PZ
RNCC: 3 | RNVC: 2 | DAC: 4
57080
RNCC: 5 | RNVC: 2 | DAC: 4
8 Jul 1997
5210-01-430-6467
Plumb Bob
PB-6
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-356-8189
Inside Micrometer Caliper
782Z-312
RNCC: 3 | RNVC: 2 | DAC: 4
65459
RNCC: 5 | RNVC: 2 | DAC: 4
784Z-312
RNCC: 5 | RNVC: 9 | DAC: 4
10 Apr 1992
5210-01-202-2207
Gage Block Set
RC112MA1
RNCC: 3 | RNVC: 2 | DAC: 4
RC111MA1
RNCC: 3 | RNVC: 2 | DAC: 4
28 Feb 1985
5120-01-430-6354
Automatic Center Punch
18C
RNCC: 3 | RNVC: 2 | DAC: 4
56757
RNCC: 5 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-430-6514
Level And Plumb
HD-24
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5120-01-430-9428
Tap And Reamer Wrench
93E
RNCC: 3 | RNVC: 2 | DAC: 4
50431
RNCC: 5 | RNVC: 2 | DAC: 4
5 May 1996
5220-01-080-5926
Profile Gage
905565-5
RNCC: 5 | RNVC: 2 | DAC: 4
28 Jul 1979
5210-01-430-6654
Combination Square
9ME-300
RNCC: 3 | RNVC: 2 | DAC: 4
50047
RNCC: 5 | RNVC: 2 | DAC: 4
2 May 1996
5210-66-013-7738
Mechanics' Dividers
83B-6
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
5210-01-430-6516
Level And Plumb
STE-36
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-430-6717
Combination Square
9-24-4R
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5120-01-430-6251
Pin Vise Set
S240Z
RNCC: 3 | RNVC: 2 | DAC: 4
51140
RNCC: 5 | RNVC: 2 | DAC: 4
2 May 1996
5120-66-010-8213
Pin Vise
162B
RNCC: 3 | RNVC: 2 | DAC: 4
1 Jan 1968
5210-21-886-9805
Combination Square Blade
CB300-36
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-21-886-9800
Outside Micrometer Caliper
V230MRLZ
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-21-104-9653
Sheet Metal Micrometer Caliper
222BRZ-1
RNCC: 3 | RNVC: 2 | DAC: 4
222R
RNCC: 5 | RNVC: 9 | DAC: 4
19 Apr 1968
5120-21-857-6237
Nail Set
800C
RNCC: 3 | RNVC: 2 | DAC: 4
116B
RNCC: 6 | RNVC: 9 | DAC: 9
11 Dec 1969
5210-21-887-9620
Thickness Gage Stock
666-7
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-21-638-0410
Outside Micrometer Caliper
436XRL-4
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-00-403-4579
Micrometer Head
T463P
RNCC: 3 | RNVC: 2 | DAC: 4
26 Jun 1970
5210-01-334-6586
Gage Block
AG6.LM
RNCC: 3 | RNVC: 2 | DAC: 4
24 Feb 1991
5210-01-242-1520
Combination Square Blade
CB36-16R
RNCC: 3 | RNVC: 2 | DAC: 4
50098
RNCC: 5 | RNVC: 2 | DAC: 4
8 Oct 1986
5210-01-416-3075
Measuring Instrument Contact Point
PT06677
RNCC: 3 | RNVC: 2 | DAC: 4
6677
RNCC: 3 | RNVC: 2 | DAC: 4
70823
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jul 1995
5210-00-250-0870
Outside Micrometer Caliper
T736.1XRL-8
RNCC: 3 | RNVC: 2 | DAC: 4
T436.1XRL-8
RNCC: 3 | RNVC: 2 | DAC: 4
72735
RNCC: 5 | RNVC: 2 | DAC: 4
436RL
RNCC: 5 | RNVC: 9 | DAC: 4
T436RL-8
RNCC: 5 | RNVC: 9 | DAC: 4
51716
RNCC: 5 | RNVC: 9 | DAC: 4
T436XRL-8
RNCC: 5 | RNVC: 9 | DAC: 4
1 Jan 1963
5210-00-984-0127
Dial Indicating Depth Gage
640RJ
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1962
3455-01-594-4812
Metal Cutting Band Saw Blade
99188
RNCC: 3 | RNVC: 2 | DAC: 6
25 Apr 2011
5210-01-390-0373
Gage Block
SS.134AA
RNCC: 3 | RNVC: 2 | DAC: 4
10 May 1994
5210-01-450-0212
Measuring Instrument Contact Point
PT06632/8
RNCC: 3 | RNVC: 2 | DAC: 4
70796
RNCC: 5 | RNVC: 2 | DAC: 4
24 Oct 1997
5210-00-590-7416
Rule Holder
62
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1963
4920-01-154-4851
Reader And Printer Assembly
907830
RNCC: 3 | RNVC: 2 | DAC: 2
25 May 1983
5210-00-783-9636
Thickness Gage Stock
666-020INTHK
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1960
5210-00-817-0757
Dial Indicator
657EWCASE
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1962
5210-00-152-0796
Special Gage
656S90987
RNCC: 3 | RNVC: 2 | DAC: 5
8 Mar 1971
5210-01-121-5032
Connecting Rod Bore Gage
84Z-134-4J
RNCC: 3 | RNVC: 2 | DAC: 4
6 Nov 1981
5210-01-397-3069
Machinist's Rule
C305R-24
RNCC: 3 | RNVC: 2 | DAC: 4
7 Oct 1994
5210-01-430-6454
Carpenter's Aluminum Rule
AR-24
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-397-3071
Machinist's Rule
C305R-12
RNCC: 3 | RNVC: 2 | DAC: 4
7 Oct 1994
5210-01-250-2324
Thickness Gage Blade
667-125
RNCC: 3 | RNVC: 2 | DAC: 4
26 Feb 1987
5210-00-230-7842
Gage Block
SS16.000A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
4920-01-080-5152
Aircraft Maintenance Fixture
905481-3
RNCC: 5 | RNVC: 2 | DAC: 5
27 Jul 1979
5210-00-230-2434
Gage Block
SS.027A1
RNCC: 3 | RNVC: 2 | DAC: 4
13 Aug 1969
5210-00-230-7823
Gage Block
SS.0207A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
5210-01-389-5925
Gage Block
RS.127AA
RNCC: 3 | RNVC: 2 | DAC: 4
26 Apr 1994
5210-21-878-4166
Thread Micrometer Caliper
575CPZ
RNCC: 3 | RNVC: 2 | DAC: 4
30 May 1978
5210-21-807-0345
Level And Plumb
133A
RNCC: 3 | RNVC: 2 | DAC: 4
16 Aug 1967
5110-21-639-6101
Hand Hacksaw Blade
RS1218
RNCC: 3 | RNVC: 2 | DAC: 4
H1218
RNCC: 5 | RNVC: 2 | DAC: 6
9 Jun 1964
5120-21-857-8459
Nail Set
116A
RNCC: 3 | RNVC: 2 | DAC: 6
18 Jun 1970
5210-21-898-3769
Out-Of-Roundne Gage
681
RNCC: 3 | RNVC: 2 | DAC: 4
681-145
RNCC: 5 | RNVC: 9 | DAC: 4
6 Mar 1985
5210-21-895-1817
Thickness Gage
172MA
RNCC: 3 | RNVC: 2 | DAC: 4
4 Feb 1984
5120-21-872-1482
Drive Pin Punch
565G
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5210-21-801-0499
Level And Plumb
132-24
RNCC: 3 | RNVC: 2 | DAC: 4
24 Feb 1969
5120-21-105-2461
Machi Scriber Point
68
RNCC: 5 | RNVC: 1 | DAC: 6
16587
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-21-638-0069
Outside Micrometer Caliper
436RL-4
RNCC: 3 | RNVC: 2 | DAC: 4
25 May 1968
5210-21-898-1728
Trammel
C251C
RNCC: 3 | RNVC: 2 | DAC: 4
5 Nov 1985
5210-21-899-8083
Outside Micrometer Caliper
230MRLZ
RNCC: 3 | RNVC: 2 | DAC: 4
29 Jul 1985
5210-21-638-0122
Center Gage
C396
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-887-9975
Combination Square
435ME-300
RNCC: 3 | RNVC: 2 | DAC: 4
30 Jan 1982
5210-21-887-9621
Thickness Gage Stock
666-8
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-21-807-1236
Protrac Acute Angle
364G
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-840-9688
Carpenter's Square
CSG-12
RNCC: 5 | RNVC: 2 | DAC: 6
4 Jun 1968
5210-01-536-0144
Dial Indicator
656-111J
RNCC: 3 | RNVC: 2 | DAC: 5
16 Dec 2005
5210-01-015-2876
Outside Micrometer Caliper
436RLZ-19
RNCC: 3 | RNVC: 2 | DAC: 4
436RL-19
RNCC: 5 | RNVC: 9 | DAC: 4
16 Jan 1976
5120-01-430-9432
Tap And Reamer Wrench
91B
RNCC: 3 | RNVC: 2 | DAC: 4
5 May 1996
5210-01-430-6411
Level And Plumb
ST3-48
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-421-1552
Inside Micrometer Caliper
700B
RNCC: 3 | RNVC: 2 | DAC: 4
2 Nov 1995
5210-01-028-4752
Micrometer Head
463L
RNCC: 3 | RNVC: 1 | DAC: 3
2 Oct 1976
5210-01-356-7900
Outside Micrometer Caliper
733XFLZ-6
RNCC: 3 | RNVC: 2 | DAC: 4
731XFLZ-6
RNCC: 5 | RNVC: 9 | DAC: 4
10 Apr 1992
4920-01-080-8181
Reference Vane Set
905481-6
RNCC: 3 | RNVC: 3 | DAC: 2
2 Aug 1979
5210-00-701-0394
Dial Indicator
655-141
RNCC: 3 | RNVC: 2 | DAC: 3
9 Feb 1968
5995-01-621-0251
Electrical Special Purpose Cable Assembly
PT61963
RNCC: 3 | RNVC: 2 | DAC: 3
PT63394
RNCC: 5 | RNVC: 9 | DAC: 3
23 Oct 2017
5220-00-131-0259
Profile Gage
901784-1-1
RNCC: 3 | RNVC: 2 | DAC: 4
6 Dec 1968
5210-01-459-5981
Gage Block Set
715-5Z
RNCC: 3 | RNVC: 2 | DAC: 4
56312
RNCC: 5 | RNVC: 2 | DAC: 4
7 Oct 1998
5120-01-279-4793
Machinist's Scribe Point
71555
RNCC: 3 | RNVC: 2 | DAC: 4
PT16584
RNCC: 5 | RNVC: 2 | DAC: 4
16584
RNCC: 5 | RNVC: 9 | DAC: 4
20 May 1988
5210-01-147-0942
Dial Indicator
655-4041
RNCC: 3 | RNVC: 2 | DAC: 4
10 Feb 1983
5120-01-554-6912
Drive Pin Punch
248C
RNCC: 3 | RNVC: 2 | DAC: 4
16 Aug 2007
5210-01-430-6280
Level And Plumb
ST2-24
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-430-6381
Level And Plumb
STE-72
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-430-6797
Carpenter's Aluminum Rule
ASE-48
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-159-3045
Height Gage
P454-12
RNCC: 3 | RNVC: 2 | DAC: 4
6 Aug 1983
5210-01-528-9681
Outside Micrometer Caliper
T436RL-9
RNCC: 3 | RNVC: 2 | DAC: 4
30 Mar 2005
5130-01-368-4399
Hole Saw Blade
UH0058
RNCC: 3 | RNVC: 2 | DAC: 4
H0058
RNCC: 5 | RNVC: 9 | DAC: 4
1 Dec 1992
5210-01-430-6137
Combination Square
9-12-4R
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-430-6493
Level And Plumb
A6-28
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-00-426-9636
Dial Indicator
655-441/5
RNCC: 3 | RNVC: 2 | DAC: 4
4 May 1974
5210-01-430-6444
Carpenter's Aluminum Rule
AR-12
RNCC: 3 | RNVC: 2 | DAC: 4
36101
RNCC: 5 | RNVC: 2 | DAC: 4
2 May 1996
5210-00-261-5843
Standard End Measuring Rod
234A-10
RNCC: 3 | RNVC: 2 | DAC: 4
50987
RNCC: 5 | RNVC: 2 | DAC: 4
1 Jan 1963
5210-01-430-6732
Screw Pitch Gage
4
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-264-3116
Dial Indicator Holder
657A
RNCC: 3 | RNVC: 1 | DAC: G
29 Sep 1987
5130-01-368-4429
Hole Saw Blade
H0234
RNCC: 3 | RNVC: 2 | DAC: 4
1 Dec 1992
5210-01-187-8443
Height Gage
259-24
RNCC: 3 | RNVC: 2 | DAC: 4
27 Aug 1984
5210-01-349-1645
Level And Plumb
36064
RNCC: 3 | RNVC: 2 | DAC: 4
MST-48
RNCC: 5 | RNVC: 2 | DAC: 4
21 Nov 1991
5110-01-478-6293
Metal Cutting Hand Saw
K153
RNCC: 3 | RNVC: 2 | DAC: 4
20 Sep 2000
5210-01-430-6457
Carpenter's Aluminum Rule
AR-36
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-450-0211
Measuring Instrument Contact Point
PT06632/6
RNCC: 3 | RNVC: 2 | DAC: 4
70794
RNCC: 5 | RNVC: 2 | DAC: 4
24 Oct 1997
5210-01-430-6579
Plumb Bob
PB-4
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-00-901-4832
Straightedge
385
RNCC: 3 | RNVC: 1 | DAC: X
385-36
RNCC: 3 | RNVC: 2 | DAC: 6
1 Jan 1960
5210-01-229-6826
Micrometer Head
262L
RNCC: 3 | RNVC: 2 | DAC: 4
3 Apr 1986
5210-01-430-6477
Level And Plumb
ML-18
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-01-367-7107
Combination Square Blade
B6-4R
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5130-01-368-4402
Hole Saw Blade
H1036
RNCC: 3 | RNVC: 2 | DAC: 4
1 Dec 1992
5210-01-132-9703
Outside Micrometer Caliper
724LZ18
RNCC: 3 | RNVC: 2 | DAC: 4
52994
RNCC: 5 | RNVC: 2 | DAC: 4
8 Jun 1982
5210-01-430-9424
Rule Depth Gage
236HA
RNCC: 3 | RNVC: 2 | DAC: 4
5 May 1996
5130-01-368-4391
Hole Saw Blade
H0176
RNCC: 3 | RNVC: 2 | DAC: 4
1 Dec 1992
5210-01-021-9596
Outside Micrometer Caliper
436FL-4
RNCC: 3 | RNVC: 2 | DAC: 4
21 May 1976
5120-01-367-7206
Solid Center Punch
264E
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5130-01-368-5815
Hole Saw Blade
H0196
RNCC: 3 | RNVC: 2 | DAC: 4
4 Dec 1992
5210-01-369-1917
Hermaphrodite Caliper
563-4
RNCC: 3 | RNVC: 2 | DAC: 4
13 Jan 1998
3455-01-560-9066
Hole Saw Blade
SH0500
RNCC: 3 | RNVC: 2 | DAC: 3
EDP61050
RNCC: 5 | RNVC: 2 | DAC: 3
19 Feb 2008
5210-00-003-9939
Gage Block Set
SPECIAL
RNCC: 3 | RNVC: 2 | DAC: 6
27 May 1972
5210-01-509-8021
Dial Indicator
906638
RNCC: 3 | RNVC: 2 | DAC: 5
2 Jul 2003
5210-00-439-5535
Dial Indicator
25-211L0C
RNCC: 3 | RNVC: 2 | DAC: 5
1 Dec 1969
5210-01-247-8884
Dial Indicator
656-341
RNCC: 3 | RNVC: 2 | DAC: 4
656-341J
RNCC: 5 | RNVC: 2 | DAC: 4
53785
RNCC: 5 | RNVC: 2 | DAC: 4
14 Jan 1987
5210-01-430-6400
Level And Plumb
ST3-24
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-00-494-6755
Outside Micrometer Caliper
220ARL
RNCC: 3 | RNVC: 2 | DAC: 3
18 Feb 1970
5210-01-430-6799
Carpenter's Aluminum Rule
ASE-24
RNCC: 3 | RNVC: 2 | DAC: 4
2 May 1996
5210-00-152-0795
Internal Indicating Gage
656S90986
RNCC: 3 | RNVC: 2 | DAC: 5
8 Mar 1971
5210-00-930-2927
Micrometer Depth Gage
440-6RL
RNCC: 3 | RNVC: 2 | DAC: 3
1 May 1968
5210-01-397-3073
Combination Square
C9-12-4R
RNCC: 3 | RNVC: 2 | DAC: 4
7 Oct 1994
5120-01-430-9426
Tap And Reamer Wrench
93B
RNCC: 3 | RNVC: 2 | DAC: 4
50428
RNCC: 5 | RNVC: 2 | DAC: 4
5 May 1996
5210-01-430-9423
Hook Rule
236HC
RNCC: 3 | RNVC: 2 | DAC: 4
5 May 1996
5210-01-368-4514
Measuring Tape
HW530-50
RNCC: 3 | RNVC: 2 | DAC: 4
1 Dec 1992
5120-01-367-7117
Nail Set
800A
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5210-01-367-7287
Measuring Tape
SCK25
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5210-01-369-5574
Small Hole Gage
829A
RNCC: 3 | RNVC: 2 | DAC: 4
25 Dec 1992
5210-01-367-7100
Combination Square Center Head
C11-1224
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5120-01-367-7115
Pin Vise
240C
RNCC: 3 | RNVC: 2 | DAC: 4
18 Nov 1992
5210-01-368-4508
Machinist's Rule
C303SR-6
RNCC: 3 | RNVC: 2 | DAC: 4
1 Dec 1992
5210-01-037-4752
Dial Indicator Holder
659AZ
RNCC: 3 | RNVC: 2 | DAC: 4
658D
RNCC: 5 | RNVC: 9 | DAC: 4
18 Mar 1977
5210-01-350-7824
Thickness Gage Blade
667M-25
RNCC: 3 | RNVC: 2 | DAC: 5
52877
RNCC: 5 | RNVC: 2 | DAC: 4
21 Dec 1991
5280-01-081-0945
Reference * Gage Set
905481-5
RNCC: 5 | RNVC: 2 | DAC: 5
8 Aug 1979
5220-01-082-8844
Profile Gage
905564-1
RNCC: 5 | RNVC: 2 | DAC: 4
12 Sep 1979
5120-01-360-4425
Swivel Knob Jeweler's Screwdriver Set
S162
RNCC: 3 | RNVC: 2 | DAC: 4
50603
RNCC: 5 | RNVC: 2 | DAC: 4
24 Jun 1992
5210-01-292-4847
Outside Micrometer Caliper
256RL-1
RNCC: 3 | RNVC: 2 | DAC: 6
51236
RNCC: 5 | RNVC: 2 | DAC: 6
17 Jan 1989
5210-00-541-3516
Outside Micrometer Caliper
224AARLZ
RNCC: 3 | RNVC: 2 | DAC: 4
50770
RNCC: 5 | RNVC: 2 | DAC: 4
1 Jan 1963
5210-00-540-6047
Thickness Gage
71
RNCC: 3 | RNVC: 2 | DAC: X
1 Jan 1963
5210-00-591-2771
Dial Indicator
711F
RNCC: 3 | RNVC: 2 | DAC: 1
1 Jan 1961
5210-00-230-2431
Gage Block
SS.024A1
RNCC: 3 | RNVC: 2 | DAC: 4
13 Aug 1969
5210-01-116-7861
Dial Indicating Depth Gage
652JZ
RNCC: 3 | RNVC: 2 | DAC: 4
2 Aug 1981
5210-21-870-2549
Dial Indicator
81-241J
RNCC: 3 | RNVC: 2 | DAC: 4
10 Sep 1974
5210-21-810-0103
Combination Square Center Head
C33-1224
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-12-141-6660
Telescoping Gage
579E
RNCC: 3 | RNVC: 2 | DAC: 5
30 May 1969
5210-21-638-0133
Vernier Depth Gage
448Z-6
RNCC: 3 | RNVC: 2 | DAC: 4
448-6
RNCC: 5 | RNVC: 9 | DAC: 4
5 Feb 1964
9515-21-887-5901
Metal Sheet
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-99-910-0081
Vernier Depth Gauge
448Z-612ME
RNCC: 5 | RNVC: 2 | DAC: 4
25 Apr 1991
5210-21-638-0219
Level And Plumb
132-12
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5110-21-859-0557
Hand Hacksaw Blade
RS1032
RNCC: 5 | RNVC: 2 | DAC: 4
14 May 1970
5210-00-252-6438
Stud And Slee Clamp
903176-2-15
RNCC: 3 | RNVC: 2 | DAC: 1
903455-12
RNCC: 3 | RNVC: 2 | DAC: 5
13 Jun 1973
5210-21-638-0104
Vernier Caliper
122EM
RNCC: 3 | RNVC: 2 | DAC: 6
26 Jun 1964
5210-21-104-9661
Outside Caliper
275-2
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-17-701-3825
Sheet And Plate Gage
283
RNCC: 6 | RNVC: 9 | DAC: 9
30 Apr 1974
5210-21-887-9615
Thickness Gage Stock
666-2
RNCC: 3 | RNVC: 2 | DAC: 4
16 Jan 1982
5210-21-638-0384
Milling Cutter Clearance Gage
459
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0134
Vernier Depth Gage
448Z-612
RNCC: 3 | RNVC: 2 | DAC: 4
448-612
RNCC: 5 | RNVC: 9 | DAC: 4
6 Jun 1968
5210-21-638-0098
Outside Micrometer Caliper
224DRLZ
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-21-801-0761
Taper Gage
269B
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-21-897-5350
Plumb Bob
177A
RNCC: 3 | RNVC: 2 | DAC: 4
30 Sep 1984
5280-21-894-0317
Machinists Tool Set
S901Z
RNCC: 3 | RNVC: 2 | DAC: 4
27 Aug 1983
9150-21-896-8308
Lubricant
M1 93245
RNCC: 3 | RNVC: 2 | DAC: 4
22 Dec 1984
5210-21-809-7740
Inside Caliper
74
RNCC: 3 | RNVC: 1 | DAC: 6
8 Apr 1964
5210-21-872-0305
Twist Drill And Tap Gage
185
RNCC: 3 | RNVC: 2 | DAC: 1
22 Apr 1975
5210-21-810-0102
Combination Square Square And Miter Head
H33-1224
RNCC: 3 | RNVC: 2 | DAC: 4
1 Feb 1965
5210-21-840-0897
Gage Block Set
RC28AA
RNCC: 3 | RNVC: 2 | DAC: 6
27 May 1965
5210-66-013-7740
Mechanics' Dividers
83B-10
RNCC: 3 | RNVC: 2 | DAC: E
1 Jan 1968
3455-66-070-3808
Hole Saw Blade
H0334
RNCC: 3 | RNVC: 1 | DAC: 4
2 Aug 1974
5210-21-859-0316
Measuring Tool Case
910
RNCC: 3 | RNVC: 2 | DAC: 4
14 May 1970
5210-21-801-0501
Bevel Mechanics Protractor
C364DZ
RNCC: 3 | RNVC: 2 | DAC: 4
364D
RNCC: 5 | RNVC: 9 | DAC: 4
8 Apr 1964
5120-21-872-1481
Drive Pin Punch
565F
RNCC: 3 | RNVC: 2 | DAC: 1
5 May 1976
5210-21-638-0196
Twist Drill And Drill Rod Gage
186
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-638-0028
Inside Caliper
274-6
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-870-1781
Micrometer Depth Gage
440MZ-75RL
RNCC: 3 | RNVC: 2 | DAC: 4
440M75RL
RNCC: 5 | RNVC: 2 | DAC: 6
25 Jul 1974
5210-21-638-0205
Dial Indicator
196B1
RNCC: 3 | RNVC: 2 | DAC: 4
25 May 1968
5210-21-810-0073
Inside Caliper
74B-3
RNCC: 3 | RNVC: 2 | DAC: 4
8 Apr 1964
5210-21-638-0431
Plain Mechanics Protractor
193
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5210-21-880-9841
Vernier Caliper
123EMZ-12
RNCC: 3 | RNVC: 2 | DAC: 4
123EMZ
RNCC: 5 | RNVC: 9 | DAC: 6
29 Jan 1980
5120-21-870-2868
Drive Pin Punch Set
S565WB
RNCC: 3 | RNVC: 2 | DAC: 1
28 Jan 1975
5120-21-877-3993
Swivel Knob Jeweler's Screwdriver Set
S555-7
RNCC: 3 | RNVC: 2 | DAC: 2
1 Nov 1977
5120-98-102-1627
Nail Set
800C
RNCC: 3 | RNVC: 2 | DAC: 3
1 Jun 1990
5210-21-859-0317
Measuring Tool Case
911
RNCC: 3 | RNVC: 2 | DAC: 4
14 May 1970
5210-21-863-0118
Optical Flat
OFS3M
RNCC: 3 | RNVC: 2 | DAC: 6
14 Oct 1971
5210-21-894-0258
Outside Micrometer Caliper Set
S436CRLSZ
RNCC: 3 | RNVC: 2 | DAC: 4
20 Aug 1983
5210-12-141-6655
Telescoping Gage Set
S579H
RNCC: 3 | RNVC: 2 | DAC: 5
30 May 1969
5210-21-638-0356
Machinist's Rule
C310R-6
RNCC: 3 | RNVC: 2 | DAC: 4
6 Jun 1968
5120-21-872-0444
Machinist's Scriber
67B
RNCC: 3 | RNVC: 1 | DAC: 4
67
RNCC: 5 | RNVC: 2 | DAC: 1
22 Apr 1975
5210-21-886-0819
Tube Micrometer Caliper
569MAPZ
RNCC: 3 | RNVC: 2 | DAC: 4
9 Jun 1981
5210-21-852-6928
Level And Plumb
133B
RNCC: 3 | RNVC: 2 | DAC: 4
11 Jan 1969
5210-21-892-3761
Groove Micrometer
260RZ
RNCC: 3 | RNVC: 2 | DAC: 4
260Z
RNCC: 5 | RNVC: 9 | DAC: 4
28 Feb 1983
5210-21-898-1727
Dial Indicator
196 SPECIAL
RNCC: 3 | RNVC: 2 | DAC: 4
196 SERIES WITH 196F,196G AND -
RNCC: 5 | RNVC: 9 | DAC: 4
1 Nov 1985
5210-21-879-8095
Standard End Measuring Rod
234A-1
RNCC: 3 | RNVC: 2 | DAC: 4
234
RNCC: 5 | RNVC: 9 | DAC: 4
2 Jan 1979
5210-21-878-4167
Thread Micrometer Caliper
575DPZ
RNCC: 3 | RNVC: 2 | DAC: 4
30 May 1978
5210-21-893-6755
Dial Indicat Tester
716
RNCC: 3 | RNVC: 2 | DAC: 4
25 Jun 1983
5210-66-055-3842
Outside Micrometer Caliper
436RLZ13
RNCC: 3 | RNVC: 2 | DAC: E
7 Oct 1972
5210-21-104-9695
Center Gage Attachm
392
RNCC: 3 | RNVC: 2 | DAC: 6
6 Jun 1968
5210-00-230-7839
Gage Block
SS8.000A1
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1969
5210-21-902-1296
Outside Micrometer Caliper
224MAARLZ
RNCC: 3 | RNVC: 2 | DAC: 4
15 Aug 1986
5120-17-707-7340
Pin Vise Set
162
RNCC: 6 | RNVC: 9 | DAC: 9
29 Jan 1973
5210-21-638-0244
Machinist's Rule
C604R-12
RNCC: 3 | RNVC: 2 | DAC: 4
4 Jun 1968
5210-99-139-1138
Cal Attachment Ball
247MB
RNCC: 6 | RNVC: 9 | DAC: 9
25 Apr 1991
5210-66-055-3844
Outside Micrometer Caliper
436RLZ15
RNCC: 3 | RNVC: 2 | DAC: E
7 Oct 1972
5210-21-868-0592
Combination Square
11
RNCC: 3 | RNVC: 1 | DAC: 6
14 Jul 1972
9510-21-887-5905
Metal Bar
496
RNCC: 3 | RNVC: 1 | DAC: 4
18 Dec 1981
5210-21-638-0249
Machinist's Rule
C604R-36
RNCC: 3 | RNVC: 2 | DAC: 4
604R-36
RNCC: 5 | RNVC: 9 | DAC: 4
2 Sep 1964
5210-21-886-9803
Universal Sleeve
58S
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-21-886-9749
Outside Micrometer Caliper
216MXRLZ-25
RNCC: 3 | RNVC: 2 | DAC: 4
23 Nov 1981
5210-21-886-9792
Dial Indicator
711MGPSZ
RNCC: 3 | RNVC: 2 | DAC: 4
2 Dec 1981
5210-21-805-1818
Dial Comparator
653J
RNCC: 3 | RNVC: 2 | DAC: 4
5 Feb 1964
5210-01-356-8193
Inside Micrometer Caliper
782Z-750
RNCC: 3 | RNVC: 2 | DAC: 4
65463
RNCC: 5 | RNVC: 2 | DAC: 4
784Z-750
RNCC: 5 | RNVC: 9 | DAC: 4
10 Apr 1992
5210-01-390-0375
Gage Block
SS.350AA
RNCC: 3 | RNVC: 2 | DAC: 4
10 May 1994
5210-01-390-1773
Gage Block
RS.102AA
RNCC: 3 | RNVC: 2 | DAC: 4
13 May 1994