1350-00-038-6845

3433-25-115-3528 3433251153528 251153528

6605-00-115-3528 6605001153528 001153528

5340-13-115-3528 5340131153528 131153528 BELLOWS,PROTECTION:

5975-15-115-3528 5975151153528 151153528 is a cylindrical item into which a wire or cable is inserted. it is inscribed for identification, to indicate connections or routing of electrical cables and the like. for unmarked items made of insulation material, see insulation sleeving, electrical. for items secured by crimping, slot and tongue, or other similar methods of fastening, see band, marker.

2530-22-115-3528 2530221153528 221153528 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.