1350-00-038-7225

5960-25-117-0889 5960251170889 251170889

5325-00-117-0889 5325001170889 001170889 is a resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. for items having internal prongs which perform the same function, see push on nut. it is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. see also clip, retaining and pin, lock. excludes ring, connecting, round.

6110-01-117-0889 6110011170889 011170889 is an item consisting of contacts, a magnetic core, and a coil with or without inclosure which is used to repeatedly establish and break a circuit. the item does not provide overload protection and is not used in line to control any other electrical controls. excludes relay, electromagnetic and starter, motor.l circuit. exludes relay, electro-magnetic and starter, motor.

2920-15-117-0889 2920151170889 151170889 VARIATORE ANTICIPO,

5365-17-117-0889 5365171170889 171170889 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.