1350-00-038-7226

5975-00-123-6441 5975001236441 001236441 is two or more junction boxes on a common mounting or mounted on each other. do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. see also terminal box.

4730-99-123-6441 4730991236441 991236441

2815-12-123-6441 2815121236441 121236441 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

7610-22-123-6441 7610221236441 221236441 is two or more sheets, written or printed,or stored on electonic media, containing no programs or software, outlining maintenance, installation and/or operating information applicable to one or more related pieces of equipment. it may have a cover. the sheets may be fastened by staple(s), loosely folded, and/or punched for loose-leaf binding. see also book. for single sheet items, see chart (as modified) and sheet, technical.

3950-25-123-6441 3950251236441 251236441 LOCKNUT