1350-00-038-7387

3010-01-117-0886 3010011170886 011170886 is a device for connecting the ends of two shafts so that rotary motion of one shaft is transmitted to the other shaft. it is constructed to allow for slight misalignment of shafts both linear and angular.

5310-17-117-0886 5310171170886 171170886 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5961-25-117-0886 5961251170886 251170886

6930-99-117-0886 6930991170886 991170886

4320-00-117-0886 4320001170886 001170886 is an assembled unit consisting of a commonly mounted centrifugal pump(s), prime mover(s), and the necessary components to provide for a complete operation.