1350-00-038-7392

7610-22-123-6445 7610221236445 221236445 is two or more sheets, written or printed,or stored on electonic media, containing no programs or software, outlining maintenance, installation and/or operating information applicable to one or more related pieces of equipment. it may have a cover. the sheets may be fastened by staple(s), loosely folded, and/or punched for loose-leaf binding. see also book. for single sheet items, see chart (as modified) and sheet, technical.

7490-00-123-6445 7490001236445 001236445 DEVICE BOX

2815-12-123-6445 2815121236445 121236445 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5950-25-123-6445 5950251236445 251236445 TRANSFORMATOR,AUTO

4820-17-123-6445 4820171236445 171236445 RELIEF VALVE