1355-00-026-7527

5930-15-114-6250 5930151146250 151146250 INTERRUTTORE, ASSIE

6505-21-114-6250 6505211146250 211146250 NEOMYCIN SULFATE AND HYDROCORTISONE ACETATE OPHTHALMIC SUSPENSION

4320-25-114-6250 4320251146250 251146250 is a device having pressure inlet(s), discharge outlet(s), and suction inlet(s) designed to move fluids or solids by utilizing the kinetic energy of a fluid forced at a high velocity through a converging nozzle(s). the item must not contain any valve(s), float(s), or pipe(s), but may contain an integral ball check(s). excludes items designed exclusively for circulating free air. see also pump, liquid operated.

5365-17-114-6250 5365171146250 171146250 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

3110-00-114-6250 3110001146250 001146250