1355-00-064-5711

5310-01-219-4170 5310012194170 012194170 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5410-15-219-4170 5410152194170 152194170 COPERTURA METALLICA

1560-00-219-4170 1560002194170 002194170

2815-99-219-4170 2815992194170 992194170 is an item designed to inclose the cylinder bore(s) of an engine block to form a combustion chamber(s). it may have liquid cooling passage(s) and/or air cooling fin(s) and may include valve(s), valve guide(s), rocker arm(s), injector tube(s), and the like. it is a component part of an engine, diesel. see also cylinder head, gasoline engine.