1385-99-252-2122

how to enable JavaScript in your web browser . 4920-99-664-1080Repair Kit4920996641080 996641080 QS/L2/00
664-1080 Germany (ZG) Italy (ZR) Approved Sources 4920-99-664-1080 Part NumberManufacturerStatusQS/L2/00
U1892 - Martonair Ltd (Replaced) Primary Buy RNCC 3 RNVC 2 DAC 2 QS/L2/00 K4131 - Norgren Martonair

5930-12-322-2601 5930123222601 123222601 is a switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. the action may be momentary, with mechanical return. the actuating device may or may not be an integral part of the switch. the item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. excludes light-switch; light-switch assembly; switch, beam selecting, headlight; switch, foot; switch, interlock; switch, pressure; switch, push-pull; switch, sensitive and switch assembly. for devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter, motor and controller, motor.

4010-14-407-8894 4010144078894 144078894 is an assembly consisting of wire rope, with terminal attachment(s) and/or end loop(s), in a continuous run from end to end. (if without attachments, one end must terminate in a loop.) it may contain one or more intermediate and/or end attachments such as sliding or fixed ring(s), hook(s), or the like. for items specifically designed for aviation, see wire rope assembly, single leg, aviation. excludes control assembly, push-pull.

5995-14-473-8984 5995144738984 144738984 is a definite continuous length of cable, power, electrical having one or both ends processed and/or terminated in fittings which provide for connection to other items. excludes cable and conduit assembly, electrical and items having branches or forks. see also wiring harness.

6130-14-222-3436 6130142223436 142223436 is an electromechanical device which interrupts the direct current input by means of a coil-driven vibrating armature (reed) whose contacts alternately open and close the direct current circuit. it is equipped with a second set of contacts which operate in synchronism with the first set and are mounted on either the same or a separate (split) armature to rectify the stepped-up alternating current voltage obtained from an external transformer secondary to produce a pulsating direct current output. for items designed to operate over a wide and comparatively high frequency range and whose coil may be excited from either an alternating current or a direct current, see chopper, electronic.