1680-00-013-2162

3830-01-567-0405 3830015670405 015670405 is an item designed to attach to the end of a tooth shank of a scarifier, excavator bucket, dipper, or the like, and forms the cutting or ripping edge. it is used on a variety of earth moving, construction, mining, excavating, and highway maintenance equipment for breaking the hard surface.

6130-00-567-0405 6130005670405 005670405

5310-14-567-0405 5310145670405 145670405 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2040-99-567-0405 2040995670405 995670405 MULTIPLE FRAMES