1680-99-961-4222
Dmu
1680999614222 999614222 960-6 0138X-045
Managed by United Kingdom
NSN Created on 17 Dec 2001
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 1680-99-961-4222
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 1680-99-961-4222 5+ Documents (More...)
Strip 737-132-124601-1RNCC: 3 | RNVC: 2 | DAC: 3124601-1RNCC: 5 | RNVC: 2 | DAC: 3 30 Apr 1980 1680-99-961-4222
5310-00-167-0832 5310001670832 001670832 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-590-3239 5310005903239 005903239 WASHER,FLAT
5310-00-701-6055 5310007016055 007016055 WASHER,FLAT
5310-00-771-3842 5310007713842 007713842 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 1680-99-961-4222
End Users 1680-99-961-4222
- United Kingdom (ZK)
Approved Sources 1680-99-961-4222
- Part Number
- Manufacturer
- Status
- 960-6
- Manufacturer
- U8677 - Drs Technologies (Replaced)
- Primary Buy
- Primary Buy
- 0138X-045
- U9124 - Ministry Of Defence, Code Reserved (Active)
- NATO Reference
- NATO Reference
NATO Stock Numbers Related to 1680-99-961-4222
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601