Premium Information is available for this item - Upgrade for $1 a day
2530-00-436-7662
Ball Stud Adjusting Plug
2530004367662 004367662 234
A headless, externally threaded item usually slotted in one end to facilitate turning and to accommodate a locking device. The opposite end may be flat, concave or drilled to mate with a tension spring, bearing, ball or ball seat. It is designed to adjust tension and secure in position the ball stud of a steering tie rod end, drag link end and/or other connectors of this type. View more Ball Stud Adjusting Plug
May 2023
3
Marketplace 2530-00-436-7662
Request a Quotation from participating marketplace vendors
Related Documents 2530-00-436-7662 5+ Documents (More...)
/fsg-25/fsc-2530/uk
fsc-5365/nz 5365-98-201-0217 Ball Stud Adjusting Plug 5365982010217 002-4899 2530-00-737-6974 2530-00-436-7662
fsc-2530/us 2530-01-198-0971 Ball Stud Adjusting Plug 2530011980971 002-4899 2530-00-737-6974 2530-00-436-7662
/fsg-25/fsc-2530/us
2530-01-399-0964 Plug 5305120243006 737-3861 2530-15-057-0607 2530-33-002-4899 2530-00-737-6974 2530-00-436-7662
2530-01-399-0964 Plug 2530001488645 737-3861 2530-15-057-0607 2530-33-002-4899 2530-00-737-6974 2530-00-436-7662
/fsg-25/fsc-2530/us
Stud Adjusting Plug 5305120243006 737-3861 2530-15-057-0607 2530-33-002-4899 2530-00-737-6974 2530-00-436-7662
Stud Adjusting Plug 2530001488645 737-3861 2530-15-057-0607 2530-33-002-4899 2530-00-737-6974 2530-00-436-7662
/fsg-28/fsc-2825/uk
www.nsnlookup.com /fsg-25/fsc-2530/de 2530-12-356-3862 Ball Stud Adjusting Plug 2530123563862 737-6974 2530-00-436-7662
www.nsnlookup.com /fsg-25/fsc-2530/be 2530-13-107-9250 Ball Stud Adjusting Plug 2530131079250 737-6974 2530-00-436-7662
/fsg-25/fsc-2530/us
Adjusting Plug 5365982010217 002-4899 2530-00-737-6974 2530-00-436-7662 fsc-2530/us 2530-01-198-0971
Ball Stud Adjusting Plug 2530011980971 002-4899 2530-00-737-6974 2530-00-436-7662 Stud Adjusting Plug
Restrictions 2530-00-436-7662
2530-00-436-7662 is a Ball Stud Adjusting Plug that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 2530-00-436-7662
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2530-00-436-7662
- US Army (A920)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FGGC)
- Effective Date:
- 1 Sep 2005
Approved Sources 2530-00-436-7662
- Part Number
- Manufacturer
- Status
- 234
- Manufacturer
- 94431 - Garrison Manufacturing Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 2530-00-436-7662
- Characteristic
- Specifications
- FIIG
- Specifications
- T307-Q
- Ball Seat End Characteristic [CFGP]
- Drilled
- Depth [AEJZ]
- 0.500 Inches Nominal
- Diameter [ABMZ]
- 1.000 Inches Nominal
- Material Document And Classification [MDCL]
- Sae 1112 Assn Std 1St Material Response
- Material [MATT]
- Steel Comp 1212
- Lubrication Fitting Threaded Hole [CFDL]
- Not Included
- Slot Width [ABGC]
- 0.313 Inches Nominal
- Slot Depth [AAZT]
- 0.625 Inches Nominal
- Overall Length [ABHP]
- 1.313 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Size And Series/Type Designator [THDS]
- 1-7/8-12 Un
Weapon Systems (WSDC) 2530-00-436-7662
DLA Procurement Analysis 2530-00-436-7662
Management Data 2530-00-436-7662
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 2530-00-436-7662
Freight Information 2530-00-436-7662
2530-00-436-7662 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 2530-00-436-7662 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 2530-00-436-7662 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 885 for ocean manifesting and military sealift. 2530-00-436-7662 is not classified as a special type of cargo when transported by water. 2530-00-436-7662 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 2530-00-436-7662
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 2530-00-436-7662 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: