Premium Information is available for this item - Upgrade for $1 a day
2530-00-725-1738
Grease Cap
2530007251738 007251738 65489-10 6-8-B-102 66825-10
A cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS. View more Grease Cap
May 2023
7
Marketplace 2530-00-725-1738
Request a Quotation from participating marketplace vendors
Related Documents 2530-00-725-1738 4+ Documents (More...)
Restrictions 2530-00-725-1738
2530-00-725-1738 is a Grease Cap that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 2530-00-725-1738
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2530-00-725-1738
- US Air Force (FGGC)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FGAX
- US Navy (N9BC)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Israel (YD01)
- Effective Date:
- 1 Jul 2016
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 2530-00-725-1738
- Part Number
- Manufacturer
- Status
- 6-8-B-102
- Manufacturer
- 08999 - Savoy Mfg Inc (Obsolete)
- Primary Buy
- Primary Buy
- 6-8-B-102
- 02582 - Savoy Products Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 66825-10
- 00365 - Tld Ace Corp (Active)
- Vendor Drawing
- Vendor Drawing
- 65489-10
- 00365 - Tld Ace Corp (Active)
- Advisory Reference
- Advisory Reference
Datasheet 2530-00-725-1738
- Characteristic
- Specifications
- FIIG
- Specifications
- A524K0
- Body Inside Diameter [ADAS]
- 1.837 Inches Minimum And 1.838 Inches Maximum
- Body Outside Diameter [ADAR]
- 1.937 Inches Minimum And 1.938 Inches Maximum
- Material [MATT]
- Steel
- Shoulder Diameter [AAVH]
- 2.063 Inches Nominal
- Overall Length [ABHP]
- 1.188 Inches Nominal
- Special Features [FEAT]
- C/Bore-Not Incl.;Grooved Face-Not Provided;Antistatic Spring-Not Incl.;Surface Treat.-Zinc Plated;Tongue Dia 1.937/1.938;Distance From End To Shoulder 0.375 In.
- Style Designator [STYL]
- Shoulder No. 2
DLA Procurement Analysis 2530-00-725-1738
Management Data 2530-00-725-1738
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 2530-00-725-1738
Freight Information 2530-00-725-1738
2530-00-725-1738 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 040470. A Sub NMFC of X. It has a NMFC Description of CAPS HUB(WHEEL BEARING GREASE CAP). 2530-00-725-1738 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 20430 which rates the freight between FCL and LCL. 2530-00-725-1738 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 586 for ocean manifesting and military sealift. 2530-00-725-1738 is not classified as a special type of cargo when transported by water. 2530-00-725-1738 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 2530-00-725-1738 1 Records
Contracting Technical Data File (CTDF) 2530-00-725-1738 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: