2840-00-007-1436

3040-01-301-9920 3040013019920 013019920 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

2910-12-301-9920 2910123019920 123019920 is a bracket specifically designed for the purpose of mounting and supporting miscellaneous accessories. excludes adjusting arms.

4010-99-301-9920 4010993019920 993019920 is an assembly consisting of wire rope, with terminal attachment(s) and/or end loop(s), in a continuous run from end to end. (if without attachments, one end must terminate in a loop.) it may contain one or more intermediate and/or end attachments such as sliding or fixed ring(s), hook(s), or the like. for items specifically designed for aviation, see wire rope assembly, single leg, aviation. excludes control assembly, push-pull.

2820-00-301-9920 2820003019920 003019920

6635-01-501-9267 6635015019267 015019267 is an item designed to convert electrical signals into mechanical vibrations or ultrasound beams. these signals are passed through a material and are reflected and scattered by any discontinuities (flaws) back to the receiving unit where they are reconverted to electrical signals and amplified for processing on an indicator for interpretation. see also transducer, supersonic test.