Premium Information is available for this item - Upgrade for $1 a day
2920-00-072-1114
Electrical Rotating Equipment End Bell
2920000721114 000721114 1941181
An item designed to support and position an armature or rotor when installed in a motor, generator or similar electrical rotating equipment. It may include items such as bearings, brushes, brush holders, oilers. View more Electrical Rotating Equipment End Bell
August 2023
16
Marketplace 2920-00-072-1114
Request a Quotation from participating marketplace vendors
Related Documents 2920-00-072-1114 5+ Documents (More...)
/fsg-61/fsc-6130/us
Restrictions 2920-00-072-1114
2920-00-072-1114 is a Electrical Rotating Equipment End Bell that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 2920-00-072-1114
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2920-00-072-1114
- US Army (A920)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FUGC)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FUAX
- France (ZF01)
- Effective Date:
- 1 May 2015
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Sep 2009
Approved Sources 2920-00-072-1114
- Part Number
- Manufacturer
- Status
- 1941181
- Manufacturer
- 1LW55 - Borgwarner Pds (Anderson), L.L.C. (Active)
- Primary Buy
- Primary Buy
- 1941181
- 16764 - General Motors Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 1941181
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 2920-00-072-1114
- Characteristic
- Specifications
- FIIG
- Specifications
- A537S0
- End Item Identification [AGAV]
- 3805-00-727-6719
- Fsc Application Data [ZZZV]
- Generator,Engine Accessory
- Material [MATT]
- Iron
- Mounting Configuration [ALGC]
- Six 0.270 In. Min,0.280 In. Max Dia Mtg Holes Equally Spaced On 6.124 In. Dia Circle
- Overall Height [ABKW]
- 0.950 Inches Minimum And 0.960 Inches Maximum
- Overall Length [ABHP]
- 8.375 Inches Nominal
- Overall Width [ABMK]
- 6.620 Inches Nominal
- Surface Treatment [SFTT]
- Paint
Weapon Systems (WSDC) 2920-00-072-1114
DLA Procurement Analysis 2920-00-072-1114
Management Data 2920-00-072-1114
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SU
- AF SICA RESIDUAL MMAC-OO-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 2920-00-072-1114
Freight Information 2920-00-072-1114
2920-00-072-1114 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 2920-00-072-1114 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 2920-00-072-1114 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 2920-00-072-1114 is not classified as a special type of cargo when transported by water. 2920-00-072-1114 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 2920-00-072-1114 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: