Premium Information is available for this item - Upgrade for $1 a day
2925-00-091-6632
Motor Armature
2925000916632 000916632 864611 851391
An armature which is a part of a motor. See also ROTOR, MOTOR. View more Motor Armature
Managed by United States
NSN Created on 1 Jan 1963
Data Last Changed
May 2023
May 2023
NATO Update Count
5
5
NATO Data Quality
Marketplace 2925-00-091-6632
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 2925-00-091-6632 5+ Documents (More...)
4720-01-661-1496 4720016611496 016611496 is a flexible, tubular item of light wall construction. it must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. it is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. for items with couplings, see hose assembly, air duct. for items of sleeve section design rated for high pressure use, see sleeve, seal, coupling. excludes hose, nonmetallic.
1660-01-483-0141 1660014830141 014830141 is a hollow body used to transport air to various parts of the aircraft for the purpose of heating, cooling, pressurizing, de-icing, and the like. it may include flange(s), bracket(s), and the like for mounting purposes. excludes pipes used in aircraft exhaust systems and pipes used in non-aircraft applications. excludes pipe, exhaust and pipe, air conditioning-heating.
4730-01-660-8389 4730016608389 016608389 is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. excludes cap, pipe.
4730-01-653-2428 4730016532428 016532428 is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. it may be disconnected for seal replacement without disturbing the rest of the line. the seals are not normally furnished with the item. for rigid type items see coupling, tube; and union, tube.
2840-01-667-7616 2840016677616 016677616 is a stationary arched metal segment used to establish clearance and a seal for the tip of a blade, turbine rotor, aircraft gas turbine engine. the inner dimension may have open honeycomb or composition filled surface or may be formed by the knife edge metal protrusions of a seal ring, labyrinth, aircraft gas turbine engine.
Restrictions 2925-00-091-6632
2925-00-091-6632 is a Motor Armature that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 2925-00-091-6632
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2925-00-091-6632
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 2925-00-091-6632
- Part Number
- Manufacturer
- Status
- 864611
- Manufacturer
- 99551 - Goodrich Corporation (Active)
- Primary Buy
- Primary Buy
- 851391
- 99551 - Goodrich Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 2925-00-091-6632
- Characteristic
- Specifications
- FIIG
- Specifications
- A272A0
- Features Provided [CBBL]
- Shaft
- Construction [CQCF]
- Slot Wound
- Overall Diameter [ADAV]
- 3.0312 Inches Nominal
- Overall Length [ABHP]
- 5.3120 Inches Nominal
DLA Procurement Analysis 2925-00-091-6632
Management Data 2925-00-091-6632
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 2925-00-091-6632
6105-12-158-7221 6105-27-024-2459 2920-12-370-4473 6105-00-421-7629 6105-00-421-9722 6105-01-225-4099 6105-17-123-1172 2920-27-034-2338 2920-27-032-9338 6105-99-824-2287 6105-00-308-9487 2920-22-615-1770 6105-00-635-1847 6105-00-506-2265 6105-99-765-8859 6105-21-004-5902 2920-66-019-1522 2920-99-828-2103
Freight Information 2925-00-091-6632
2925-00-091-6632 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 060580. A Sub NMFC of X. It has a NMFC Description of ARMATURES. 2925-00-091-6632 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34050 which rates the freight between FCL and LCL. 2925-00-091-6632 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 2925-00-091-6632 is not classified as a special type of cargo when transported by water. 2925-00-091-6632 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 2925-00-091-6632 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: