2940-00-306-5519

(CAGE Code 00736) 1 Jan 1963 2940-00-306-5519 Connector Assemblyx C17276RNCC: 5 | RNVC: 2 | DAC: 6 1

2940-00-306-5517 Intake Air Cleaner D16709RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: 4 1 Jan 1963 2940-00-306-5519

3020-00-969-0710 3020009690710 009690710 is a grouping of two or more or any combination of gear, helical; gearshaft, helical; or gear cluster, helical which have been matched together for a given characteristic within a specified tolerance. includes only those gears designed and tested to accomplish a specifically desired function.

5365-01-121-3055 5365011213055 011213055 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3020-17-107-9055 3020171079055 171079055 is a safety device fabricated of rigid or semirigid material formed in various shapes. it may be fabricated from a single piece of material, and contains brackets, holes, or other means of attachments. it is designed to partially or fully inclose gear(s), pulley(s), sprocket(s), and the like.