2940-15-205-9916

Adapter 2165600RNCC: 3 | RNVC: 2 | DAC: 5(241)A52862165600RNCC: 5 | RNVC: 2 | DAC: U 18 Nov 2010 2940-15-205-9916

NumberManufacturerStatus30842-507-3 94756 - The Boeing Company https//www.nsnlookup.com /fsg-59/fsc-5940/dk 5940-22-306-5073
5940223065073 223065073 5940-22-306-5073 5940223065073 223065073 https//www.nsnlookup.com /fsg-53/fsc

5310-99-558-0742 5310995580742 995580742 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-01-543-2473 5310015432473 015432473 is a washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.

CAGE N3203 Kloeften & Kloeften A/S in Oslo, Norway