Premium Information is available for this item - Upgrade for $1 a day
3020-00-090-8786
Gear Cluster
3020000908786 000908786 1626055-2 1626055 1626055-1
A cylindrical item having a full 360 degree (6.282 radians) complement of teeth on two or more surfaces. It may be a one-piece casting or composed of two or more separate items firmly held together by welding, rivets, pins, or the like, to form a single unit. It is designed to mount on a shaft. For items consisting of a shaft with an integral complement(s) or gear teeth, see GEARSHAFT (as modified). Excludes GEAR SUBASSEMBLY, SPEED DECREASER. View more Gear Cluster
Managed by United States
NSN Created on 22 Nov 1972
Data Last Changed
November 2023
November 2023
NATO Update Count
13
13
NATO Data Quality
Marketplace 3020-00-090-8786
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-090-8786 4+ Documents (More...)
Upgrade your Account Upgrade 7930-01-398-0885Solvent-Detergent Cleaning Compound7930013980885 013980885 1626055
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 1626055
(Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 6 1626055 0AWE2 - Maintex Inc (Replaced) Canceled
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 1626055
(Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 6 1626055 0AWE2 - Maintex Inc (Replaced) Canceled
5955-12-162-6055 5955121626055 121626055 is an item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.
5315-01-162-6055 5315011626055 011626055 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.
5365-00-162-6055 5365001626055 001626055 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.
Restrictions 3020-00-090-8786
3020-00-090-8786 is a Gear Cluster that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-090-8786
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-090-8786
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BDCT
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3020-00-090-8786
- Part Number
- Manufacturer
- Status
- 1626055-2
- Manufacturer
- 99251 - Mission Systems Davenport Inc. (Active)
- Primary Buy
- Primary Buy
- 1626055
- 99251 - Mission Systems Davenport Inc. (Active)
- Secondary Buy
- Secondary Buy
- 1626055-1
- 99251 - Mission Systems Davenport Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3020-00-090-8786
- Characteristic
- Specifications
- FIIG
- Specifications
- A270A0
- Material [MATT]
- Steel Corrosion Resisting Shaft/Hub
- Material [MATT]
- Copper Alloy First Gear
- Material [MATT]
- Steel Corrosion Resisting Second Gear
- Construction [CQCF]
- Assembled
- Design Type [APGF]
- Spur First Gear
- Design Type [APGF]
- Spur Second Gear
- Nominal Outside Diameter [CWCD]
- 0.6071 Inches First Gear
- Nominal Outside Diameter [CWCD]
- 0.1086 Inches Second Gear
- Nominal Overall Length [CWFR]
- 0.280 Inches
- Hub Style Designator [CWTR]
- 1 Step Both Ends
- Hub Nominal Length [CWQN]
- 0.066 Inches First End
- Hub Nominal Length [CWQN]
- 0.112 Inches Second End
- Hub Nominal Diameter [CWTX]
- 0.0124 Inches Both Ends
Weapon Systems (WSDC) 3020-00-090-8786
DLA Procurement Analysis 3020-00-090-8786
- Last Stock Position:
- 40 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3020-00-090-8786
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3020-00-090-8786
3020-12-318-4483 3020-21-851-5000 3020-12-317-9293 3020-99-645-4036 3020-99-716-6141 3020-12-196-8194 3020-12-183-8377 3020-12-172-1432 3020-21-874-2277 3020-27-020-1384 3020-12-182-6770 3020-12-169-9795 3020-99-450-3195 3020-12-196-1079 3020-99-451-0434 3020-21-874-4995 3020-99-490-3919 3020-16-000-8479
Freight Information 3020-00-090-8786
3020-00-090-8786 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 197339. A Sub NMFC of X. It has a NMFC Description of WHEELS COG/GEAR/PINION I/S. 3020-00-090-8786 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 96710 which rates the freight between FCL and LCL. 3020-00-090-8786 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-090-8786 is not classified as a special type of cargo when transported by water. 3020-00-090-8786 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-090-8786
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3020-00-090-8786 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: