Premium Information is available for this item - Upgrade for $1 a day
3020-00-783-4648
Bevel Gear
3020007834648 007834648 549213
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. View more Bevel Gear
May 2023
8
Marketplace 3020-00-783-4648
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-783-4648 5+ Documents (More...)
/fsg-25/fsc-2540/uk
Part NumberManufacturerStatus50832623 D9434 - Renk Gmbh (Active) Primary Buy RNCC 3 RNVC 2 DAC 1 549213
Restrictions 3020-00-783-4648
3020-00-783-4648 is a Bevel Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-783-4648
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-783-4648
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3020-00-783-4648
- Part Number
- Manufacturer
- Status
- 549213
- Manufacturer
- 70210 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- 549213
- 72599 - Alliedsignal Inc Dba Allied-Signal (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3020-00-783-4648
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Material [MATT]
- Steel Comp E9310 Overall
- Material Document And Classification [MDCL]
- Ams6260 Assn Std Single Material Response Overall
- Hardness Rating [CQFM]
- 90.0 Rockwell Superficial 15-N Nominal Teeth
- Teeth Quantity [AJLA]
- 31
- Teeth Type [CWMW]
- Zerol
- Tooth Direction [CWNM]
- Left
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Pitch Angle [CWQD]
- 59.8664 Degrees
- Style Designator [STYL]
- Peripheral Face, Back Hub Protruding
- Pitch Diameter [AGJS]
- 1.9380 Inches Nominal
- Nominal Overall Length [CWFR]
- 1.275 Inches
- Nominal Outside Diameter [CWCD]
- 1.979 Inches
- Face Nominal Width [CWRM]
- 0.275 Inches
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 0.770 Inches Second End
- Bore Style [ANTP]
- Involute Spline Both Ends
- Bore Nominal Diameter [CWRS]
- 0.950 Inches Both Ends
- Spline Quantity [ABSA]
- 18 Both Ends
- Spline Pitch Diameter [BDTX]
- 0.9010 Inches Nominal Both Ends
- Hub Style Designator [CWTR]
- Plain Second End
- Hub Nominal Diameter [CWTX]
- 1.265 Inches Second End
- Body Style [AAQL]
- Plain, Solid
- Special Features [FEAT]
- Counterbore Second End,1.000 In.Diameter,0.4800 In.Depth
DLA Procurement Analysis 3020-00-783-4648
Management Data 3020-00-783-4648
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3020-00-783-4648
Freight Information 3020-00-783-4648
3020-00-783-4648 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062070. A Sub NMFC of Z. It has a NMFC Description of GEAR MOTORS/PARTS NOI. 3020-00-783-4648 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-00-783-4648 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-783-4648 is not classified as a special type of cargo when transported by water. 3020-00-783-4648 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3020-00-783-4648 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: