Premium Information is available for this item - Upgrade for $1 a day
3020-00-950-7192
Bevel Gear
3020009507192 009507192 2138215 1P0965 1P965 5M2049
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. View more Bevel Gear
Managed by United States
NSN Created on 4 May 1966
Data Last Changed
May 2023
May 2023
NATO Update Count
12
12
NATO Data Quality
Marketplace 3020-00-950-7192
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-950-7192 5+ Documents (More...)
El Segundo 6. 1P965 Visual Communications Co is a Succeeded(Merged) Commercial Supplier with the Cage
Code 1P965.
What is CAGE Code 1P965?
Code 1P965.
What is CAGE Code 1P965?
6130-99-213-8215 6130992138215 992138215 is a device consisting of one or more components utilizing an alternating or direct current source to reactivate batteries in which reversible chemical reactions occur. use only for devices containing resistors, metallic, or electronic type rectifiers or vibrators and which are specifically designed for the purpose of charging batteries. may include filters, meters, load contactor and alarm circuits. may include battery charging switchboards which are supplied with integral or external means of rectification.
7025-15-213-8215 7025152138215 152138215 P.C. PENTIUM IV2,53
5355-01-213-8215 5355012138215 012138215 is an item designed to transmit manual, rotary or linear motion to other devices. may include detachable or nondetachable stud (shaft), pointer, or skirt. it may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. for items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. for items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. excludes doorknob; and handle (as modified).
3120-14-213-8215 3120142138215 142138215 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.
Restrictions 3020-00-950-7192
3020-00-950-7192 is a Bevel Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-950-7192
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-950-7192
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3020-00-950-7192
- Part Number
- Manufacturer
- Status
- 2138215
- Manufacturer
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
- 1P0965
- 11083 - Caterpillar Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1P965
- 11083 - Caterpillar Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5M2049
- 11083 - Caterpillar Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3020-00-950-7192
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Attachment Method [ABSX]
- Mounting Hole
- Body Recess Nominal Depth [CWRB]
- 0.200 Inches First End
- Body Style [AAQL]
- Plain, Solid
- Bolt Hole Circle Nominal Diameter [CWZN]
- 6.000 Inches Axially Through Body, First End
- Bore Nominal Diameter [CWRS]
- 4.875 Inches Both Ends
- Bore Style [ANTP]
- Plain First End
- Bore Style [ANTP]
- W/Counterbore Counter Bore, Second End
- Counterbore Nominal Diameter [CWTG]
- 7.241 Inches Counter Bore, Second End
- Counterbore Nominal Depth [CWTB]
- 0.340 Inches Counter Bore, Second End
- Face Nominal Width [CWRM]
- 2.200 Inches
- Hardness Rating [CQFM]
- 59.0 Rockwell C Minimum Overall And 64.0 Rockwell C Maximum Overall
- Mounting Hole Nominal Diameter [CWZK]
- 0.626 Inches Axially Through Body, First End
- Mounting Hole Type And Quantity [CTQY]
- 10 Plain Axially Through Body, First End
- Nominal Outside Diameter [CWCD]
- 16.4446 Inches
- Nominal Overall Length [CWFR]
- 2.000 Inches
- Material [MATT]
- Steel Overall
- Pitch Diameter [AGJS]
- 16.3330 Inches Nominal
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Style Designator [STYL]
- Side Face, Hubless
- Surface Treatment [SFTT]
- Carbon Overall
- Teeth Quantity [AJLA]
- 19
- Teeth Type [CWMW]
- Zerol
Weapon Systems (WSDC) 3020-00-950-7192
DLA Procurement Analysis 3020-00-950-7192
Management Data 3020-00-950-7192
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3020-00-950-7192
3020-22-257-9958 3020-12-189-4936 3020-66-146-9440 3020-99-225-6536 2520-99-444-3108 3020-12-188-3882 3020-17-103-1324 3020-99-103-4567 3020-99-815-7532 3020-99-606-5159 3020-21-904-2826 3020-99-052-4848 3020-99-422-8665 3020-12-332-8292 3020-12-152-6141 3020-12-165-2493 3020-99-701-9510 3020-12-186-4803
Freight Information 3020-00-950-7192
3020-00-950-7192 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062070. A Sub NMFC of Z. It has a NMFC Description of GEAR MOTORS/PARTS NOI. 3020-00-950-7192 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-00-950-7192 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-950-7192 is not classified as a special type of cargo when transported by water. 3020-00-950-7192 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-950-7192
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- MIL-PRF-16173, Cosmoline, Grade 1, Hard Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 1, Corrosion Preventive, Solvent Cutback, Cold Application, Hard Film
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3020-00-950-7192 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: