3020-01-243-6344

5950-01-357-0202 5950013570202 013570202 is an item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). it is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). for coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic..

0553Aircraft Structural Component Shipping And Storage Container8145123600553 123600553 M-507-013-00.0-M-51-047
Kingdom (ZK) Italy (ZR) Approved Sources 8145-12-360-0553 Part NumberManufacturerStatusM-507-013-00.0-M-51-047

Upgrade your Account Upgrade 5935-00-929-7400Electrical Receptacle Connector5935009297400 009297400 51-047
-000 51-047-0000REVG 151-276-1 An electrical fitting with electrical contacts constructed to be affixed
7400 CONNECTOR,RECEPTACLE,ELECTRICAL RQST NS Request Quotation Subscribe to View Vendor Details... 51-047

5365-12-167-0452 5365121670452 121670452 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5910-15-004-8504 5910150048504 150048504 is a capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. the plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. it may be a single unit, or consist of two or more fixed units which cannot be separated. for items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see capacitor, fixed, metallized, paper-plastic dielectric.