3020-21-883-3323

Supply Items Approved for CAGE 09562 Page 1 of 1 3020-21-883-3323 Roller Chain Link 40-4RNCC: 3 | RNVC

5925-99-549-1608 5925995491608 995491608 is a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.

5910-14-297-2007 5910142972007 142972007 is a capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. it may be a single unit, or consist of two or more fixed units which cannot be separated.

5975-14-465-8548 5975144658548 144658548 is a cylindrical item into which a wire or cable is inserted. it is inscribed for identification, to indicate connections or routing of electrical cables and the like. for unmarked items made of insulation material, see insulation sleeving, electrical. for items secured by crimping, slot and tongue, or other similar methods of fastening, see band, marker.

5305-99-803-5907 5305998035907 998035907 is an externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). it is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. see also bolt, externally relieved body and bolt, internal wrenching.