Premium Information is available for this item - Upgrade for $1 a day
3040-00-469-9060
Shouldered Shaft
3040004699060 004699060 45-524557-1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
7
Marketplace 3040-00-469-9060
Request a Quotation from participating marketplace vendors
Restrictions 3040-00-469-9060
3040-00-469-9060 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-469-9060
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-469-9060
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-00-469-9060
- Part Number
- Manufacturer
- Status
- 45-524557-1
- Manufacturer
- 7EK50 - Textron Aviation Inc (Active)
- Primary Buy
- Primary Buy
- 45-524557-1
- 70898 - Beechcraft Corporation (Replaced)
- Original Design
- Original Design
Datasheet 3040-00-469-9060
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3470 Inches Nominal
- First End Internal Thread Length [AMER]
- 0.562 Inches Nominal
- First End Style [AAGZ]
- Internal Threaded
- Fsc Application Data [ZZZV]
- Stablizer Assembly
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.625 Inches Nominal
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.500 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.1870 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.312 Inches Nominal
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Overall Length [ABHP]
- 3.250 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 125.0 Microinches
DLA Procurement Analysis 3040-00-469-9060
Management Data 3040-00-469-9060
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-469-9060
Freight Information 3040-00-469-9060
3040-00-469-9060 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-469-9060 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-469-9060 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-469-9060 is not classified as a special type of cargo when transported by water. 3040-00-469-9060 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-469-9060 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: