Premium Information is available for this item - Upgrade for $1 a day
3040-01-123-5723
Shouldered Shaft
3040011235723 011235723 201-4684481 ITEM 7 87776-0106 ITEM 7 201-4684481 87776-0106
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
3
Marketplace 3040-01-123-5723
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-123-5723 5+ Documents (More...)
Shouldered Shaft 87776-0106 Gearshaft 87692-1807 ITEM 22RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1982 3040
-01-123-3013 Shouldered Shaft 87776-0106 ITEM 12RNCC: 5 | RNVC: 9 | DAC: 6 10 Dec 1981 3020-01-122-9936
ITEM 2RNCC: 5 ITE 201-4684481 ITEM 2 87776-0106 ITEM 2 201-468448187776-0106 Managed by United States
ITE 201-4684481 ITEM 2 87776-0106 ITEM 2 201-468448187776-0106 Managed by United States NSN Created
/fsg-30/fsc-3020/us
Shouldered Shaft 87776-0106 Gearshaft 87692-1807 ITEM 22RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1982 3040
Gear Box 87776-0106 ITEM 2RNCC: 5 https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-01-122-9936 Gear
ITEM 1 4684481-0001 87776-0106 ITEM 1 4684481 201-4684481 87776-0106 Managed by United States NSN Created
Shouldered Shaft 87776-0106 ITEM 12RNCC: 5 | RNVC: 9 | DAC: 6 10 Dec 1981 3020-01-122-9936 Gear
/fsg-30/fsc-3040/us
Shouldered Shaft 87776-0106 Gearshaft 87692-1807 4684481 ITEM 3 Managed by United States NSN Created
on 11 Dec Shouldered Shaft 87776-0106 Gearshaft 87692-1807 201-468448187776-0106 A gear in the form
Restrictions 3040-01-123-5723
3040-01-123-5723 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-123-5723
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-123-5723
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-123-5723
- Part Number
- Manufacturer
- Status
- 87776-0106 ITEM 7
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 201-4684481 ITEM 7
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87776-0106 ITEM 7
- 62991 - Drw Mfg Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 201-4684481
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87776-0106
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-123-5723
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 2.9930 Inches Minimum And 3.0000 Inches Maximum
- First End Angle Between Keyways [AMFE]
- 180.0 Degrees Nominal
- First End Keyway Depth [AMDG]
- 0.423 Inches Minimum And 0.428 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.7500 Inches Minimum And 0.7520 Inches Maximum
- First End Distance From Keyway Center To End [AMDH]
- 2.372 Inches Nominal
- First End External Keyway Length [AMDE]
- 3.505 Inches Nominal
- First End Style [AAGZ]
- Two Indented Flat Keyways
- Material Document And Classification [MDCL]
- Qq-N-286,Class A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 3.500 Inches Nominal
- Second End Angle Between Keyways [AMHY]
- 180.0 Degrees Nominal
- Second End External Keyway Length [AMFS]
- 3.505 Inches Nominal
- Second End Diameter [AMFZ]
- 2.9870 Inches Minimum And 2.9890 Inches Maximum
- Second End Distance From Keyway Center To End [AMFW]
- 4.117 Inches Nominal
- Second End Style [AAHP]
- Two Indented Flat Keyways
- Second End Keyway Depth [AMFT]
- 0.423 Inches Minimum And 0.428 Inches Maximum
- Second End Keyway Width [AMFR]
- 0.7500 Inches Minimum And 0.7520 Inches Maximum
- Overall Length [ABHP]
- 14.250 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-123-5723
DLA Procurement Analysis 3040-01-123-5723
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-123-5723
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-123-5723
Freight Information 3040-01-123-5723
3040-01-123-5723 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-123-5723 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-123-5723 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-123-5723 is not classified as a special type of cargo when transported by water. 3040-01-123-5723 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-123-5723
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-123-5723 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: