Premium Information is available for this item - Upgrade for $1 a day
3040-01-146-4886
Shouldered Shaft
3040011464886 011464886 87832-1662 ITEM 4 709-4863094 ITEM 4 709-4863094 87832-1662
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-146-4886
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-146-4886 5+ Documents (More...)
ITE 709-4863094 ITEM3 87832-1662 ITEM 3 87832-1662 709-4863094 A shaft having two or more different
ITEM 11 4863094 ITEM 11 87832-1662 4863094 An item fabricated from a single, internally cored casting
/fsg-30/fsc-3040/us
ITEM 11 4863094 ITEM 11 87832-1662 4863094 An item fabricated from a single, internally cored casting
ITEM 7 87832-1662 ITEM 7 A metallic item, usually square or rectangular in cross section, usually longer
ITEM 6 87832-1662 ITEM 6 A metallic item, usually square or rectangular in cross section, usually longer
NumberManufacturerStatus709-4863094 ITEM 6 80064 - Naval Ship Systems Command (Active) Primary Buy RNCC 3 RNVC 2 DAC B 87832-1662
ITEM 7 87832-1662 ITEM 7 A metallic item, usually square or rectangular in cross section, usually longer
NumberManufacturerStatus709-4863094 ITEM 7 80064 - Naval Ship Systems Command (Active) Primary Buy RNCC 3 RNVC 2 DAC B 87832-1662
/fsg-30/fsc-3010/us
DAC E 87832-1662REV.A 96169 - Electric Boat Corporation (Active) Primary Buy RNCC 3 RNVC 2 DAC E 709-4863094
Restrictions 3040-01-146-4886
3040-01-146-4886 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-146-4886
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-146-4886
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-146-4886
- Part Number
- Manufacturer
- Status
- 87832-1662 ITEM 4
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4863094 ITEM 4
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 709-4863094
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87832-1662
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-146-4886
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7480 Inches Minimum And 0.7500 Inches Maximum
- First End Keyway Depth [AMDG]
- 0.112 Inches Nominal
- First End Keyway Width [AMCZ]
- 0.1900 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 0.688 Inches Nominal
- First End External Keyway Length [AMDE]
- 1.062 Inches Nominal
- First End Style [AAGZ]
- Indented Flat Keyway
- Material Document And Classification [MDCL]
- Qq-S-763,Cond B Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 304
- Largest Step Diameter [CSPY]
- 1.000 Inches Nominal
- Second End Angle Between Keyways [AMHY]
- 180.0 Degrees Nominal
- Second End Diameter [AMFZ]
- 1.0000 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 0.595 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.875 Inches Nominal
- Second End Style [AAHP]
- Two Indented Flat Keyways
- Second End Keyway Depth [AMFT]
- 0.078 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.1590 Inches Nominal
- Overall Length [ABHP]
- 4.375 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-146-4886
DLA Procurement Analysis 3040-01-146-4886
Management Data 3040-01-146-4886
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-146-4886
Freight Information 3040-01-146-4886
3040-01-146-4886 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-146-4886 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-146-4886 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-146-4886 is not classified as a special type of cargo when transported by water. 3040-01-146-4886 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-146-4886
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-146-4886 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: