Premium Information is available for this item - Upgrade for $1 a day
3110-00-242-1839
Annular Ball Bearing
3110002421839 002421839 0782 204SST3G2 77504XR3CJ
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
May 2023
5
Marketplace 3110-00-242-1839
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 3110-00-242-1839 4+ Documents (More...)
Restrictions 3110-00-242-1839
3110-00-242-1839 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-00-242-1839
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-242-1839
- National Security Agency (DGX1)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- DCX1
- Supplementary Receivers:
- CXKZ
Approved Sources 3110-00-242-1839
- Part Number
- Manufacturer
- Status
- 0782
- Manufacturer
- 88379 - Frontgrade Technologies Inc. (Active)
- Source Control
- Source Control
- 204SST3G2
- 70854 - Schaeffler Aerospace Usa Corp (Active)
- Primary Buy
- Primary Buy
- 77504XR3CJ
- 43334 - General Motors Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-00-242-1839
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bore Diameter [ABXV]
- 0.7870 Inches Minimum And 0.7874 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Material [MATT]
- Steel Overall
- Internal Fit-Up Designation [AGZH]
- Standard
- Load Direction [AGZC]
- Radial
- Lubrication Material Document And Classification [LMDC]
- Mil-G-23827 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Retainer Fabrication Method [AGYF]
- Pressed
- Shield Quantity [AGYK]
- 2
- Overall Outside Diameter [ADGA]
- 1.8499 Inches Minimum And 1.8504 Inches Maximum
- Overall Width [ABMK]
- 0.5462 Inches Minimum And 0.5512 Inches Maximum
- Standard Tolerance Designation [CTFZ]
- Abec No.3
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-00-242-1839
Management Data 3110-00-242-1839
NATO Stock Numbers Related to 3110-00-242-1839
Freight Information 3110-00-242-1839
3110-00-242-1839 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-242-1839 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-242-1839 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-00-242-1839 is not classified as a special type of cargo when transported by water. 3110-00-242-1839 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-00-242-1839
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-00-242-1839 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: