Premium Information is available for this item - Upgrade for $1 a day
3110-01-158-7178
Annular Ball Bearing
3110011587178 011587178 MRC305S 305 12321729 3305X1A
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
Managed by United States
NSN Created on 27 Jul 1983
Data Last Changed
November 2023
November 2023
NATO Update Count
6
6
NATO Data Quality
Marketplace 3110-01-158-7178
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
FinditParts
305 Roadmaster 305 - <Li>Chrome Rear Hub Cap With Hub Hole. Fits 7 1/4" Diameter Axle 12 Each 1/2"; Or 8 Each 9/16" Studs<Li>7 1/4" I.D. STK NE $6.85 Distributor Buy Now
12321729 RQST NE 
3305X1A RQST NE
Updated Every Day 3110-01-158-7178 RQST NE
Updated Every Day 3110-01-158-7178 RQST
Updated Every Day 3110-01-158-7178 RQST NE
Related Documents 3110-01-158-7178 5+ Documents (More...)
3110-01-140-9935 Annular Ball Bearing SX07E20LLUPX1/2ASRNCC: 3 | RNVC: 2 | DAC: 5 21 Oct 1982 3110-01-158-7178
Obsolete RNCC 5 RNVC 9 DAC 9 NATO Stock Numbers Related to 7125-12-321-7296 7125-12-319-9554 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
7125-15-192-0898 7125151920898 151920898 SCAFFALE 30+5 CASEL
Obsolete RNCC 5 RNVC 9 DAC 9 NATO Stock Numbers Related to 7125-12-321-7295 7125-12-319-9554 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
Obsolete RNCC 5 RNVC 9 DAC 9 NATO Stock Numbers Related to 7125-12-321-7294 7125-12-319-9554 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
198-8478 7125-99-687-2094 7125-12-320-7882 7125-12-319-9550 7125-12-321-0495 7125-12-337-0790 7125-12-305
Restrictions 3110-01-158-7178
3110-01-158-7178 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-158-7178
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-158-7178
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Australia (ZA01)
- Effective Date:
- 1 Jan 1997
Approved Sources 3110-01-158-7178
- Part Number
- Manufacturer
- Status
- 12321729
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Source Control
- Source Control
- 12321729
- 0LTL1 - Ntn Bearing Corporation Of America (Active)
- Primary Buy
- Primary Buy
- 12321729
- 38443 - Skf Usa Inc. (Active)
- Primary Buy
- Primary Buy
- 12321729
- 52676 - Skf Usa Inc. (Active)
- Primary Buy
- Primary Buy
- 12321729
- 01212 - Federal-Mogul Corp (Active)
- Primary Buy
- Primary Buy
- MRC305S
- 52676 - Skf Usa Inc. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 305
- 01212 - Federal-Mogul Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 3305X1A
- 43334 - General Motors Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-01-158-7178
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bore Diameter [ABXV]
- 0.9838 Inches Minimum And 0.9844 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Material [MATT]
- Steel Overall
- Load Direction [AGZC]
- Radial
- Overall Outside Diameter [ADGA]
- 2.4402 Inches Minimum And 2.4411 Inches Maximum
- Overall Width [ABMK]
- 0.6643 Inches Minimum And 0.6693 Inches Maximum
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Unground
Weapon Systems (WSDC) 3110-01-158-7178
DLA Procurement Analysis 3110-01-158-7178
- Last Stock Position:
- 193 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3110-01-158-7178
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 3110-01-158-7178
3110-27-045-3706 3110-15-070-0701 3110-22-618-3610 3110-33-154-0805 3110-34-031-3489 3110-21-878-4043 3110-14-399-3621 3110-19-004-0780 3110-12-169-0120 3110-66-077-7949 3110-12-327-7655 3110-14-369-1301 3110-27-051-6446 3110-17-111-1344 3110-66-077-6577 3110-12-193-4432 3110-27-058-5009 3110-14-519-4012
Freight Information 3110-01-158-7178
3110-01-158-7178 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-158-7178 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3110-01-158-7178 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-158-7178 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-158-7178 is not classified as a special type of cargo when transported by water. 3110-01-158-7178 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-158-7178
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3110-01-158-7178 1 Records
Contracting Technical Data File (CTDF) 3110-01-158-7178 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: