Premium Information is available for this item - Upgrade for $1 a day
3110-01-190-5826
Needle Roller Bearing
3110011905826 011905826 MR-26-S
A single or multiple-row antifriction bearing used with or without inner or outer races characterized by relatively small size rollers usually not ranging above 0.250 inch (6.35mm) diameter and generally longer in length in relation to diameter. View more Needle Roller Bearing
May 2023
3
Marketplace 3110-01-190-5826
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-190-5826 5+ Documents (More...)
Restrictions 3110-01-190-5826
3110-01-190-5826 is a Needle Roller Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-190-5826
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-190-5826
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-190-5826
- Part Number
- Manufacturer
- Status
- MR-26-S
- Manufacturer
- 92563 - Mcgill Manufacturing Company, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-190-5826
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Rigid
- Bearing Seal Type [AGYW]
- Lips Turned Inwardly
- Bore Diameter [ABXV]
- 1.6250 Inches Nominal
- Features Provided [CBBL]
- Lubrication Hole And Lubrication Groove
- Material [MATT]
- Plastic Polyamide Seal
- Material [MATT]
- Steel Outer Ring
- Material [MATT]
- Steel Retainer
- Material [MATT]
- Steel Roller
- Lubrication Material [ADZG]
- Grease
- Retainer Fabrication Method [AGYF]
- Pressed
- Seal Quantity [AGYJ]
- 1
- Overall Outside Diameter [ADGA]
- 2.1875 Inches Nominal
- Overall Width [ABMK]
- 1.2500 Inches Nominal
- Standard Tolerance Designation [CTFZ]
- Afbma Std Tolerance For Industrial Needle Bearings
- Style Designator [STYL]
- Non-Separable, With Roller Retainer, Hardened And Ground
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-190-5826
Management Data 3110-01-190-5826
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-190-5826
Freight Information 3110-01-190-5826
3110-01-190-5826 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-190-5826 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-190-5826 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-190-5826 is not classified as a special type of cargo when transported by water. 3110-01-190-5826 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-190-5826 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: