Premium Information is available for this item - Upgrade for $1 a day
3120-00-401-8723
Rod End Plain Bearing
3120004018723 004018723 53G970703-11
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING. View more Rod End Plain Bearing
May 2023
2
Marketplace 3120-00-401-8723
Request a Quotation from participating marketplace vendors
Restrictions 3120-00-401-8723
3120-00-401-8723 is a Rod End Plain Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-00-401-8723
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-401-8723
- US Air Force (FUGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FUCX
Approved Sources 3120-00-401-8723
- Part Number
- Manufacturer
- Status
- 53G970703-11
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-00-401-8723
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Bore Center To Shank End Distance [AGGG]
- 3.0600 Inches Nominal
- Bore Diameter [ABXV]
- 0.3745 Inches Minimum And 0.3750 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Nominal Inner Member
- Hardness Rating [CQFM]
- 62.0 Rockwell C Nominal Race Insert
- Material [MATT]
- Plastic Polyethylene Terephthalate Race Liner And Plastic Polytetrafluoroethylene Race Liner
- Material [MATT]
- Steel Comp 414 Race Insert
- Material [MATT]
- Steel Comp 440C Inner Member
- Material [MATT]
- Titanium Alloy Uns R56400 Rod End Body
- Outer Member Outside Diameter [AGGF]
- 1.5000 Inches Nominal
- Outer Member Width [AGGH]
- 0.5000 Inches Minimum And 0.5100 Inches Maximum
- Inner Member Width [AGGJ]
- 0.6230 Inches Minimum And 0.6250 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 4928 Assn Std 1St Material Response Rod End Body
- Material Document And Classification [MDCL]
- Ams 5614 Assn Std 2Nd Material Response Race Insert
- Material Document And Classification [MDCL]
- Ams 5630 Assn Std Single Material Response Inner Member
- Shank Style [AAZF]
- Externally Threaded
- Shank Thread Length [AGGY]
- 1.5000 Inches Nominal
- Overall Length [ABHP]
- 3.8100 Inches Nominal
- Style Designator [STYL]
- Ball Type
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Diameter [AWDP]
- 0.500 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Series Designator [THSD]
- Unf
DLA Procurement Analysis 3120-00-401-8723
Management Data 3120-00-401-8723
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- BF
- F-4 (PHANTOM II)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-401-8723
Freight Information 3120-00-401-8723
3120-00-401-8723 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-00-401-8723 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 3120-00-401-8723 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-401-8723 is not classified as a special type of cargo when transported by water. 3120-00-401-8723 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-00-401-8723 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: