Premium Information is available for this item - Upgrade for $1 a day
3120-01-108-8516
Thrust Washer Bearing
3120011088516 011088516 TP816 11103111 PL-H185A001 PIECE 186 56882 TP816 PWA1114-57 PL-E185H001 PIECE 33
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
November 2023
12
Marketplace 3120-01-108-8516
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-108-8516 5+ Documents (More...)
Solutions America Inc (Active 7X677 - General Motors Llc (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC F TP816
7X677 - General Motors Llc (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC F TP816 61928 - General Motors
5 RNVC 9 DAC E TP-816 70040 - General Motors Llc (Obsolete) Canceled/Obsolete RNCC 5 RNVC 9 DAC 6 TP816
Restrictions 3120-01-108-8516
3120-01-108-8516 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-108-8516
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-108-8516
- US Coast Guard (C911)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- C005
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- NASA (G860)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Jul 1993
Approved Sources 3120-01-108-8516
- Part Number
- Manufacturer
- Status
- TP816
- Manufacturer
- 71041 - Altra Industrial Motion Corp. (Active)
- Primary Buy
- Primary Buy
- 11103111
- 0Y3H3 - Fastenal Company (Active)
- Secondary Buy
- Secondary Buy
- PL-H185A001 PIECE 186
- 98523 - Jered Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 56882 TP816
- 71041 - Altra Industrial Motion Corp. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PWA1114-57
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PL-E185H001 PIECE 33
- 98523 - Jered Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-108-8516
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 0.5050 Inches Minimum And 0.5100 Inches Maximum
- Material [MATT]
- Plastic Overall
- Outside Diameter [ABKV]
- 0.9970 Inches Minimum And 1.0030 Inches Maximum
- Lubrication Material [ADZG]
- Lubricant, Manufacturers Standard
- Overall Thickness [ADUM]
- 0.0570 Inches Minimum And 0.0630 Inches Maximum
- Style Designator [STYL]
- Round
Weapon Systems (WSDC) 3120-01-108-8516
DLA Procurement Analysis 3120-01-108-8516
- Last Stock Position:
- 31 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-108-8516
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-108-8516
Freight Information 3120-01-108-8516
3120-01-108-8516 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 3120-01-108-8516 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 3120-01-108-8516 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-108-8516 is not classified as a special type of cargo when transported by water. 3120-01-108-8516 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-108-8516
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3120-01-108-8516 1 Records
Contracting Technical Data File (CTDF) 3120-01-108-8516 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: