Premium Information is available for this item - Upgrade for $1 a day
3230-00-277-1088
Router Bit
3230002771088 002771088 16-51 16-21 16-05
A specifically designed tool to be used on nonmetallic materials. It may have fluted cutting edges or formed blades on the periphery and one end, and a driving and/or mounting element on the opposite end. Double end straight shank bits are literally two bits in one, with cutting positions on both ends of the shank. View more Router Bit
May 2023
4
Marketplace 3230-00-277-1088
Request a Quotation from participating marketplace vendors
Related Documents 3230-00-277-1088 5+ Documents (More...)
M1089 Gear Set Repair ............... 16-51 H Hoist M1090 /M1094 Dump Body Hoist Cylinder Replacement
Fixture and Conduit Replacement ...................... 16-59 Lower Spreader Bar Replacement ....... 16-21
Assembly Replacement/ Repair ........................... 16-36 Lower Spreader Bar Replacement ....... 16-21
M1089 Gear Set Repair ............... 16-51 General Assembly Instructions ................. 2-28 Cleaning
Restrictions 3230-00-277-1088
3230-00-277-1088 is a Router Bit that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3230-00-277-1088
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3230-00-277-1088
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- Turkey (ZW01)
- Effective Date:
- 1 Sep 2009
Approved Sources 3230-00-277-1088
- Part Number
- Manufacturer
- Status
- 16-51
- Manufacturer
- 85996 - Onsrud Cutter Inc (Active)
- Primary Buy
- Primary Buy
- 16-21
- 85996 - Onsrud Cutter Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 16-05
- 85996 - Onsrud Cutter Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3230-00-277-1088
- Characteristic
- Specifications
- FIIG
- Specifications
- T220-B
- Design Type [APGF]
- Veining
- Cutting Rotation Direction [AKZV]
- Right-Hand
- Flute/Cutting Edge Quantity [BBFM]
- 2
- Cutter End Design [BBFN]
- Single
- Shank Type [APCG]
- Straight
- Shank Diameter [AAZE]
- 0.250 Inches Nominal
- Shank Length [AATR]
- 1.500 Inches Nominal
- Cutting Edge Diameter [BBFP]
- 0.094 Inches Nominal
- Cutting Edge Length [AQMW]
- 0.250 Inches Nominal
- Form Cutter [BBFR]
- Not Included
DLA Procurement Analysis 3230-00-277-1088
Management Data 3230-00-277-1088
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3230-00-277-1088
Freight Information 3230-00-277-1088
3230-00-277-1088 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 186590. A Sub NMFC of X. It has a NMFC Description of TOOLS:ELEC HYDR PNEU/I/C ENG/PARTS. 3230-00-277-1088 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 91790 which rates the freight between FCL and LCL. 3230-00-277-1088 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3230-00-277-1088 is not classified as a special type of cargo when transported by water. 3230-00-277-1088 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3230-00-277-1088
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Waterproof Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 3230-00-277-1088 1 Records
Contracting Technical Data File (CTDF) 3230-00-277-1088 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: