Premium Information is available for this item - Upgrade for $1 a day
3405-00-222-1329
Metal Cutting Band Saw
3405002221329 002221329 MILS24035 8MARK II 8 3405-1292-1818
A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF. View more Metal Cutting Band Saw
January 2023
8
Marketplace 3405-00-222-1329
Request a Quotation from participating marketplace vendors
Related Documents 3405-00-222-1329 3+ Documents (More...)
Hole Saw Blade 96RNCC: 3 | RNVC: 2 | DAC: E 2 Aug 1974 3110-00-399-2397 Needle Bearing Cam Follower 8-
126FRNCC: 3 | RNVC: 2 | DAC: 4 1 Jan 1963 3405-00-399-2398 Saw Guide Roller Assembly 8-127PRNCC: 3 |
DAC: 4 1 Jan 1963 3405-00-556-4956 Metal Cutting Band Saw 3405-2253-1612RNCC: 6 | RNVC: 9 | DAC: 9 8
| RNVC: 2 | DAC: 2 12 Apr 1980 3405-01-055-6185 Metal Cutting Band Saw 87RNCC: 3 | RNVC: 9 | DAC: 4 8
Restrictions 3405-00-222-1329
3405-00-222-1329 is a Metal Cutting Band Saw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3405-00-222-1329
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3405-00-222-1329
- MOE Rule:
- DCR3
- Effective Date:
- 1 May 1996
- US Air Force (F5CR)
- Effective Date:
- 1 May 1996
- Former MOE Rule:
- FGG4
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3405-00-222-1329
- Part Number
- Manufacturer
- Status
- 8MARK II
- Manufacturer
- 03895 - Armstrong-Blum Mfg. Co. (Active)
- Primary Buy
- Primary Buy
- MILS24035
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 8
- 03895 - Armstrong-Blum Mfg. Co. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3405-1292-1818
- 99998 - Defense Supply Center Richmond (Active)
- NATO Reference
- NATO Reference
Datasheet 3405-00-222-1329
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-S
- Drive Method [ARCM]
- Electric Motor
- Electric Motor Quantity [AWLX]
- 1
- Band Type For Which Designed [BWMC]
- Saw Blade
- Blade Maximum Width Accommodated [BWMH]
- 0.750 Inches
- Braking Facility [AQLX]
- Not Included
- Built-In Coolant System [BWNG]
- Included
- Current Type [ACDC]
- Ac
- Cutting Speed Quantity [BWNB]
- 3
- Cutting Speed Range [BWMZ]
- +80.0/+200.0 Feet Per Minute
- Distance Between Guide And Table [BWMN]
- 18.000 Inches Nominal
- Feed Method [AMWX]
- Cutting Band Into Work
- Frame Left Tilt Angle In Deg [BWMK]
- 45.0
- Frame Right Tilt Angle In Deg [BWMJ]
- 45.0
- Frame Type [ALDF]
- Tilt
- Frequency Rating [ACZB]
- 60.0 Hertz Nominal
- Horsepower Rating [ANCY]
- 1.000
- Mounting Type [AAXX]
- Floor
- Integral Butt Welder [BWNH]
- Not Included
- Integral Grinder [BWNJ]
- Not Included
- Jaw Maximum Opening [BJXR]
- 21.000 Inches
- Power Feed Feature [BWND]
- Provided
- Special Features [FEAT]
- 18In. By 20In.
- Phase [FAAZ]
- Three
- Vise [BWML]
- Provided
- Voltage Rating [AMSE]
- 230.0 Volts Minimum And 460.0 Volts Maximum
- Table Length [ARDQ]
- 33.000 Inches Nominal
- Table Type [BNBB]
- Nontilting
- Table Width [ARDR]
- 24.000 Inches Nominal
- Throat Depth [AQCL]
- 18.000 Inches Nominal
Management Data 3405-00-222-1329
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3405-00-222-1329
Freight Information 3405-00-222-1329
3405-00-222-1329 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of B. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS SUB2. 3405-00-222-1329 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 3405-00-222-1329 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3405-00-222-1329 is classified as a Protected/Sensitive Non-Hazardous Non-ESD Commodity when transported by water. 3405-00-222-1329 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3405-00-222-1329
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement