Premium Information is available for this item - Upgrade for $1 a day
3405-00-240-1648
Metal Cutting Band Saw
3405002401648 002401648 MILS13908SIZE1
A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF. View more Metal Cutting Band Saw
January 2023
4
Marketplace 3405-00-240-1648
Request a Quotation from participating marketplace vendors
Related Documents 3405-00-240-1648 3+ Documents (More...)
Metal Cutting Band Saw 3405002401648 3405-00-240-1648 3405002401648 002401648 is a vairable speed
NumberManufacturerStatus2012-2 18056 - Doall Baltimore Company (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 MILS13908SIZE1
Restrictions 3405-00-240-1648
3405-00-240-1648 is a Metal Cutting Band Saw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3405-00-240-1648
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3405-00-240-1648
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jul 1994
- US Air Force (F5CR)
- Effective Date:
- 1 Jul 1994
Approved Sources 3405-00-240-1648
- Part Number
- Manufacturer
- Status
- MILS13908SIZE1
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 3405-00-240-1648
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-S
- Drive Method [ARCM]
- Electric Motor
- Electric Motor Quantity [AWLX]
- 2
- Band Type For Which Designed [BWMC]
- File Or Saw Blade
- Blade Maximum Length Accommodated [BWMG]
- 120.000 Inches
- Blade Maximum Width Accommodated [BWMH]
- 0.500 Inches
- Braking Facility [AQLX]
- Not Included
- Built-In Coolant System [BWNG]
- Not Included
- Current Type [ACDC]
- Ac Or Dc
- Cutting Speed Range [BWMZ]
- +50.0/+1500.0 Feet Per Minute
- Distance Between Guide And Table [BWMN]
- 10.000 Inches Nominal
- Feed Method [AMWX]
- Work Into Cutting Band
- File Maximum Length Accommodated [BWMD]
- 120.000 Inches
- Frame Type [ALDF]
- Rigid
- Frequency Rating [ACZB]
- 60.0 Hertz Nominal
- Horsepower Rating [ANCY]
- 0.750
- Mounting Type [AAXX]
- Floor
- Integral Butt Welder [BWNH]
- Included
- Integral Grinder [BWNJ]
- Included
- Power Feed Feature [BWND]
- Provided
- Rotational Speed Rating In Rpm [AMZE]
- 1800.0
- Phase [FAAZ]
- Single Or Three
- Vise [BWML]
- Not Provided
- Voltage Rating [AMSE]
- 208.0 Volts Nominal
- Table Length [ARDQ]
- 24.000 Inches Nominal
- Table Type [BNBB]
- Tilting
- Table Width [ARDR]
- 24.000 Inches Nominal
- Throat Depth [AQCL]
- 16.000 Inches Nominal
Management Data 3405-00-240-1648
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3405-00-240-1648
Freight Information 3405-00-240-1648
3405-00-240-1648 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of B. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS SUB2. 3405-00-240-1648 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 3405-00-240-1648 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3405-00-240-1648 is classified as a Protected/Sensitive Non-Hazardous Non-ESD Commodity when transported by water. 3405-00-240-1648 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3405-00-240-1648
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement