Premium Information is available for this item - Upgrade for $1 a day
3405-00-409-0063
Metal Cutting Band Saw
3405004090063 004090063 28-390 143 W/2398487
A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF. View more Metal Cutting Band Saw
January 2023
12
Marketplace 3405-00-409-0063
Request a Quotation from participating marketplace vendors
Related Documents 3405-00-409-0063 5+ Documents (More...)
Users 5975-14-517-4184 France (ZF) Approved Sources 5975-14-517-4184 Part NumberManufacturerStatusP 28 390
Restrictions 3405-00-409-0063
3405-00-409-0063 is a Metal Cutting Band Saw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 3405-00-409-0063
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Jun 2010
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3405-00-409-0063
- Part Number
- Manufacturer
- Status
- 28-390
- Manufacturer
- 83738 - Delta Intl Machinery Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 143 W/2398487
- 94389 - Houdaille Industries Inc (Obsolete)
- Secondary Buy
- Secondary Buy
Datasheet 3405-00-409-0063
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-S
- Drive Method [ARCM]
- Electric Motor
- Electric Motor Quantity [AWLX]
- 1
- Accessory Components And Quantity [AKYD]
- Fence,Rip,18 In.,1;Belt Attachment,Sanding Abrasive,1;Welder And Grinder,Butt,1;Lamp Attachment,1;Sliding,Straight And Angle Cut-Off,1;Lamp Attachment,Sliding Jig,1;Spare Drive Belt Set,1;Blade,Skip Tooth,100 Ft.Coil,Aluminum And Plastic Cutting,1;Raker Set,Flexible Back,Conventional Tooth,1/2 In.Wide,14 Tooth,100 Ft.Coil,1;Blade,1/2 In.Wide,24 Tooth,Pipe And Channel Cutting,100 Ft.Coil,1;Belt,Sanding,Coarse Grit,3;Belt,Sanding,Medium Grit,3
- Band Type For Which Designed [BWMC]
- Saw Blade
- Blade Maximum Length Accommodated [BWMG]
- 94.000 Inches
- Blade Maximum Width Accommodated [BWMH]
- 0.750 Inches
- Braking Facility [AQLX]
- Not Included
- Built-In Coolant System [BWNG]
- Not Included
- Current Type [ACDC]
- Ac
- Cutting Speed Quantity [BWNB]
- 8
- Cutting Speed Range [BWMZ]
- +40.0/+3000.0 Feet Per Minute
- Distance Between Guide And Table [BWMN]
- 6.250 Inches Nominal
- Frame Type [ALDF]
- Rigid
- Frequency Rating [ACZB]
- 60.0 Hertz Nominal
- Horsepower Rating [ANCY]
- 0.750
- Mounting Type [AAXX]
- Floor
- Integral Butt Welder [BWNH]
- Not Included
- Integral Grinder [BWNJ]
- Not Included
- Power Feed Feature [BWND]
- Not Provided
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By The Drive Method,Electric Motor Requirements And Accessory Components Requirement
- Rotational Speed Rating In Rpm [AMZE]
- 1725.0
- Phase [FAAZ]
- Single
- Vise [BWML]
- Not Provided
- Voltage Rating [AMSE]
- 115.0 Volts Nominal
- Table Left Tilt Angle In Deg [BWLZ]
- 10.0
- Table Length [ARDQ]
- 14.000 Inches Nominal
- Table Right Tilt Angle In Deg [BWLY]
- 45.0
- Table Type [BNBB]
- Tilting
- Table Width [ARDR]
- 14.000 Inches Nominal
- Throat Depth [AQCL]
- 13.750 Inches Nominal
NATO Stock Numbers Related to 3405-00-409-0063
Freight Information 3405-00-409-0063
3405-00-409-0063 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of B. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS SUB2. 3405-00-409-0063 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. 3405-00-409-0063 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3405-00-409-0063 is not classified as a special type of cargo when transported by water. 3405-00-409-0063 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3405-00-409-0063
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- Cushion, Anchor, Block or Brace as Required
- --
- Any Suitable Container
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --