Premium Information is available for this item - Upgrade for $1 a day
3405-00-469-9775
Metal Cutting Band Saw
3405004699775 004699775 28-364
A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF. View more Metal Cutting Band Saw
January 2023
4
Marketplace 3405-00-469-9775
Request a Quotation from participating marketplace vendors
Related Documents 3405-00-469-9775 2+ Documents (More...)
Restrictions 3405-00-469-9775
3405-00-469-9775 is a Metal Cutting Band Saw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3405-00-469-9775
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3405-00-469-9775
- MOE Rule:
- DCR3
- Effective Date:
- 1 Jul 1994
- US Air Force (F5CR)
- Effective Date:
- 1 Jul 1994
Approved Sources 3405-00-469-9775
- Part Number
- Manufacturer
- Status
- 28-364
- Manufacturer
- 83738 - Delta Intl Machinery Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 28-364
- 80318 - Btr Valve Sealants Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3405-00-469-9775
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-S
- Drive Method [ARCM]
- Electric Motor
- Electric Motor Quantity [AWLX]
- 1
- Accessory Components And Quantity [AKYD]
- Chip Blower,1;Lamp Attachment,1
- Band Type For Which Designed [BWMC]
- Saw Blade
- Blade Maximum Length Accommodated [BWMG]
- 142.500 Inches
- Blade Maximum Width Accommodated [BWMH]
- 1.000 Inches
- Braking Facility [AQLX]
- Not Included
- Built-In Coolant System [BWNG]
- Not Included
- Current Type [ACDC]
- Ac
- Cutting Speed Range [BWMZ]
- +50.0/+4500.0 Feet Per Minute
- Distance Between Guide And Table [BWMN]
- 12.000 Inches Nominal
- Frame Type [ALDF]
- Rigid
- Frequency Rating [ACZB]
- 60.0 Hertz Nominal
- Horsepower Rating [ANCY]
- 2.000
- Mounting Type [AAXX]
- Floor
- Infinite Cutting Speed Feature [BWNC]
- Provided
- Integral Butt Welder [BWNH]
- Included
- Integral Grinder [BWNJ]
- Included
- Power Feed Feature [BWND]
- Not Provided
- Reference Number Differentiating Characteristics [ZZZY]
- Ancy,Acdc,Amse,Aczb,Faaz,Awlx,Akyd
- Rotational Speed Rating In Rpm [AMZE]
- 1725.0
- Phase [FAAZ]
- Three
- Vise [BWML]
- Not Provided
- Voltage Rating [AMSE]
- 220.0 Volts Minimum And 440.0 Volts Maximum
- Table Length [ARDQ]
- 24.250 Inches Nominal
- Table Left Tilt Angle In Deg [BWLZ]
- 12.0
- Table Right Tilt Angle In Deg [BWLY]
- 45.0
- Table Type [BNBB]
- Tilting
- Table Width [ARDR]
- 24.250 Inches Nominal
- Throat Depth [AQCL]
- 20.000 Inches Nominal
Management Data 3405-00-469-9775
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - S
- Reparable. Condemn at Depot. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3405-00-469-9775
Freight Information 3405-00-469-9775
3405-00-469-9775 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of B. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS SUB2. 3405-00-469-9775 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 3405-00-469-9775 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3405-00-469-9775 is not classified as a special type of cargo when transported by water. 3405-00-469-9775 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3405-00-469-9775
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement