Premium Information is available for this item - Upgrade for $1 a day
3416-00-150-7111
Engine Lathe
3416001507111 001507111 EXL56B
January 2023
7
Marketplace 3416-00-150-7111
Request a Quotation from participating marketplace vendors
Related Documents 3416-00-150-7111 2+ Documents (More...)
Restrictions 3416-00-150-7111
3416-00-150-7111 is a Engine Lathe Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3416-00-150-7111
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3416-00-150-7111
- MOE Rule:
- DCR3
- Effective Date:
- 1 May 1996
- US Air Force (F5CR)
- Effective Date:
- 1 May 1996
Approved Sources 3416-00-150-7111
- Part Number
- Manufacturer
- Status
- EXL56B
- Manufacturer
- 54522 - Acme-Cleveland Corp (Active)
- Incomplete Reference
- Incomplete Reference
Datasheet 3416-00-150-7111
- Characteristic
- Specifications
- FIIG
- Specifications
- T221-B
- Electric Motor Horsepower Rating [ASHK]
- 1.500
- Electric Motor Quantity [AWLX]
- 1
- Accessory Components And Quantity [AKYD]
- 3 Jaw Universal Chuck 6 In.; 2 Centers,Solid,60 Degrees,No. 2 Morse Taper; 1 Spindle Sleeve Bushing,No. 2 Morse Taper; 1 Chuck,Drill,No. 2 Morse Taper; 1 Steady Rest; 1 Tool Post
- Actual Swing Over Bed [BTTF]
- 10.125 Inches Nominal
- Bed Type [AWHA]
- Solid
- Carriage Feed Change Quantity [BTYT]
- 60
- Carriage Cross Feed Operation Method [BTYS]
- Hand And Power
- Carriage Longitudinal Feed Operation Method [BTYR]
- Hand And Power
- Carriage Quantity [BTYQ]
- 1
- Center To Center Distance [ADQR]
- 36.000 Inches Nominal
- Current Type [ACDC]
- Ac
- Design Type [APGF]
- Screw
- Gear Change Type [BTYW]
- Quick
- Frequency In Hertz [FREQ]
- 60.0
- Headstock Drive Type [BTWL]
- Direct Pulley, Back Geared
- Headstock Center Taper Size Designator [BTWM]
- 2 Morse
- Hole Diameter Through Spindle [BTYP]
- 1.375 Inches Nominal
- Mounting Type [AAXX]
- Floor
- Performance Type [AGLD]
- Light Duty
- Phase [FAAZ]
- Three
- Purpose For Which Designed [AKSL]
- Toolroom
- Rated Swing [BTTD]
- 10.000 Inches Minimum And 11.000 Inches Maximum
- Reference Number Differentiating Characteristics [ZZZY]
- Apgf,Btwb,Btzr,Btsz,Awlx,Ashk,Acdc,Elec,Freq,Faaz,Aaxx
- Thread Change Quantity [BTWB]
- 60
- Thread Quantity Range [BTZR]
- +4.0/+240.0 Per Inch
- Voltage In Volts [ELEC]
- 220.0 And 440.0
- Spindle Speed Quantity [BTSZ]
- 8
- Spindle Speed Range In Rpm [BTTB]
- +50.0 To 1350.0
- Swing Over Cross Slide [BTTG]
- 6.250 Inches Nominal
Management Data 3416-00-150-7111
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3416-00-150-7111
Freight Information 3416-00-150-7111
3416-00-150-7111 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 131670. A Sub NMFC of Z. It has a NMFC Description of TOOLS PWR O/T PWR HND TOOLS. 3416-00-150-7111 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 3416-00-150-7111 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61060 which rates the freight between FCL and LCL. 3416-00-150-7111 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3416-00-150-7111 is not classified as a special type of cargo when transported by water. 3416-00-150-7111 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3416-00-150-7111
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Special requirements
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement