3460-00-004-1003

Wheel 87A80L5AV217RNCC: 3 | RNVC: 2 | DAC: 517A80L8V22RNCC: 5 | RNVC: 9 | DAC: 3 14 Jun 1972 3460-00-004-1003

0000-41-003-0960 0000410030960 410030960 PUMPING UNIT,CENTRI

5310-14-554-5694 5310145545694 145545694 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6150-14-540-4072 6150145404072 145404072 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

8145-21-874-0249 8145218740249 218740249 is a reusable item of any configuration designed to enclose any of a variety of item(s) to protect them against impact, vibration, climatic conditions and the like, during transport and storage. do not use if a more specific name applies.