Premium Information is available for this item - Upgrade for $1 a day
3460-00-189-4614
Drill Chuck
3460001894614 001894614 A-A-51140 6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19
An accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE. View more Drill Chuck
November 2023
16
Marketplace 3460-00-189-4614
Request a Quotation from participating marketplace vendors
Related Documents 3460-00-189-4614 5+ Documents (More...)
AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory 6A33 AND K3 02067
6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-189-4614 Drill Chuck 3460001894614 001894614,A-A
-51140 6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An
6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory
6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory
6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory
6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An accessory
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-189-4614 Drill Chuck 3460001894614 001894614,A-A
-51140 6A33 AND K3 02067 AND K3 AA51140-IA19 2812A16 AND KEY 3 GGG-C-350 A-A-51140 CL 1 ST A SZ 19 An
Restrictions 3460-00-189-4614
3460-00-189-4614 is a Drill Chuck that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3460-00-189-4614
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3460-00-189-4614
- US Army (A921)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A182
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- NASA (G720)
- Effective Date:
- 1 Apr 1991
- NASA (G760)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GT
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3460-00-189-4614
- Part Number
- Manufacturer
- Status
- AA51140-IA19
- Manufacturer
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- A-A-51140
- 58536 - Federal Commercial Item Description (Active)
- Incomplete Standard
- Incomplete Standard
- 6A33 AND K3
- 75078 - Jacobs Mfg Co The (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 02067 AND K3
- 75078 - Jacobs Mfg Co The (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 2812A16 AND KEY 3
- 39428 - Mcmaster-Carr Supply Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- GGG-C-350
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A-A-51140 CL 1 ST A SZ 19
- 58536 - Federal Commercial Item Description (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3460-00-189-4614
- Characteristic
- Specifications
- FIIG
- Specifications
- T182-H
- Arbor [BJWC]
- Not Included
- Attachment Type [BDHD]
- Jacobs Taper
- Attachment Method [ABSX]
- Arbor Hole
- Attachment Size Designation [BJWD]
- No. 33 Jacobs Taper Hole
- Bearing Type [ACSK]
- Plain
- Unit Type [APQB]
- 3-Jaw Key
- Performance Type [AGLD]
- Medium Duty
- Special Features [FEAT]
- W/Key; Class 1 Style A Size 19
- Tool Size Accommodated [BJWF]
- 0.500 Inches Nominal
Weapon Systems (WSDC) 3460-00-189-4614
DLA Procurement Analysis 3460-00-189-4614
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3460-00-189-4614
Army
- Materiel Category and Inventory Manager:
- E
- General Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3460-00-189-4614
Freight Information 3460-00-189-4614
3460-00-189-4614 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 184130. A Sub NMFC of X. It has a NMFC Description of TOOLS:CHUCKS DRILL BIT HOLDING I/S. 3460-00-189-4614 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 90287 which rates the freight between FCL and LCL. 3460-00-189-4614 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3460-00-189-4614 is not classified as a special type of cargo when transported by water. 3460-00-189-4614 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3460-00-189-4614
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Waterproof Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Special requirement – See specific instructions or drawings provided
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3460-00-189-4614 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- P
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: