Premium Information is available for this item - Upgrade for $1 a day
3460-00-189-4626
Drill Chuck
3460001894626 001894626 GGG-C-350 2812A51 02101 36B 5/8-16 36B3668
An accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE. View more Drill Chuck
November 2023
8
Marketplace 3460-00-189-4626
Request a Quotation from participating marketplace vendors
Related Documents 3460-00-189-4626 5+ Documents (More...)
TY1CL2 An accessory for holding tools with a plain cylindrical shank such as drills, taps GGG-C-350
TY1CL2 An accessory for holding tools with a plain cylindrical shank such as drills, taps GGG-C-350
GGG-C-350 TY1CL2 An accessory for holding tools with a plain cylindrical shank such as drills, taps
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-189-4626 Drill Chuck 3460001894626 001894626,GGG-C
GGG-C-350 CHUCK,DRILL 9 EA NS Request Quotation Subscribe to View Vendor Details... 34B CHUCK,DRILL
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-189-4626 Drill Chuck 3460001894626 001894626,GGG-C
GGG-C-350 TY1CL2 An accessory for holding tools with a plain cylindrical shank such as drills, taps
A-A-50970 An accessory for holding tools with a plain cylindrical GGG-C-350 CHUCK,DRILL 4 EA NS
https//www.nsnlookup.com /fsg-34/fsc-3460/us 3460-00-189-4626 Drill Chuck 3460001894626 001894626,GGG-C
-350 GGG-C-350 CHUCK,DRILL 9 EA NS Request Quotation Updated Every Day 2812A51 RQST NE Updated Every
Restrictions 3460-00-189-4626
3460-00-189-4626 is a Drill Chuck that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3460-00-189-4626
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3460-00-189-4626
- US Army (A921)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A182
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- NASA (G900)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3460-00-189-4626
- Part Number
- Manufacturer
- Status
- GGG-C-350
- Manufacturer
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 2812A51
- 39428 - Mcmaster-Carr Supply Co (Active)
- Secondary Buy
- Secondary Buy
- 02101
- 75078 - Jacobs Mfg Co The (Active)
- Secondary Buy
- Secondary Buy
- 36B 5/8-16
- 75078 - Jacobs Mfg Co The (Active)
- Secondary Buy
- Secondary Buy
- 36B3668
- 75078 - Jacobs Mfg Co The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3460-00-189-4626
- Characteristic
- Specifications
- FIIG
- Specifications
- T182-H
- Arbor [BJWC]
- Not Included
- Attachment Type [BDHD]
- Threaded
- Attachment Method [ABSX]
- Arbor Hole
- Attachment Size Designation [BJWD]
- 5/8-16Nf
- Bearing Type [ACSK]
- Plain
- Nondefinitive Spec/Std Data [ZZZT]
- 1 Type And 2 Class
- Unit Type [APQB]
- 3-Jaw Key
- Performance Type [AGLD]
- Medium Duty
- Tool Size Accommodated [BJWF]
- 0.188 Inches Minimum And 0.750 Inches Maximum
Weapon Systems (WSDC) 3460-00-189-4626
DLA Procurement Analysis 3460-00-189-4626
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3460-00-189-4626
Army
- Materiel Category and Inventory Manager:
- E
- General Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3460-00-189-4626
Freight Information 3460-00-189-4626
3460-00-189-4626 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 184130. A Sub NMFC of X. It has a NMFC Description of TOOLS:CHUCKS DRILL BIT HOLDING I/S. 3460-00-189-4626 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 90287 which rates the freight between FCL and LCL. 3460-00-189-4626 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 732 for ocean manifesting and military sealift. 3460-00-189-4626 is not classified as a special type of cargo when transported by water. 3460-00-189-4626 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3460-00-189-4626
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- MIL-PRF-16173, Cosmoline, Grade 2, Soft Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 3460-00-189-4626 3 Records
Contracting Technical Data File (CTDF) 3460-00-189-4626 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: