3530-00-171-1725

6625-15-133-0235 6625151330235 151330235 VOLMETRO

5310-12-148-2243 5310121482243 121482243 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5340-12-120-8167 5340121208167 121208167 is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. it may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. for items conducting electric current, see clip, electrical or clamp, electrical. for items which partially surround an item, see strap, retaining. for items which entirely surround an item and do not have inherent spring tension, see clamp, loop. see also clip, retaining. do not use if a more specific item name is available.

4920-01-038-7509 4920010387509 010387509 ADAPTER,TEST UNIT

4920-01-038-7536 4920010387536 010387536 ADAPTER,TEST UNIT