Premium Information is available for this item - Upgrade for $1 a day
3530-00-780-4976
Bobbin Winder Spindle
3530007804976 007804976 265023
Managed by United States
NSN Created on 1 Jan 1962
Data Last Changed
May 2023
May 2023
NATO Update Count
3
3
NATO Data Quality
Marketplace 3530-00-780-4976
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3530-00-780-4976 5+ Documents (More...)
Jan 1962 3530-00-780-4955 Shaft Connection Belt 265121RNCC: 3 | RNVC: 2 | DAC: 5 1 Jan 1962 3530-00-780-4976
5310-14-263-4835 5310142634835 142634835 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
https//www.nsnlookup.com
/fsg-59/fsc-5995/us
/fsg-59/fsc-5995/us
5995-01-239-7293 Cable Assembly 5995012397293 012397293
5995-01-239-7293 5995012397293 012397293 CABLE ASSEMBLY
https//www.nsnlookup.com
/fsg-10/fsc-1020/us
/fsg-10/fsc-1020/us
1020-00-159-5446 Block Assembly 1020001595446 001595446
1020-00-159-5446 1020001595446 001595446 BLOCK ASSEMBLY
7125-17-103-7427 7125171037427 171037427 is a plastic, metal, or wood item with drawers. the drawers must be individually supported. generally used for holding small items such as electronic parts, screws, washers and the like. it does not have open shelves or bins. see also bin, storage and disply, stationary stationary.
Restrictions 3530-00-780-4976
3530-00-780-4976 is a Bobbin Winder Spindle that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3530-00-780-4976
- US Army (A920)
- Effective Date:
- 1 Sep 2006
- US Air Force (FGGI)
- Effective Date:
- 1 Sep 2006
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- United States of America (ZZ)
Approved Sources 3530-00-780-4976
- Part Number
- Manufacturer
- Status
- 265023
- Manufacturer
- 15613 - Singer Industrial Sewing Products Co (Active)
- Primary Buy
- Primary Buy
- 265023
- 77948 - Singer Co The (Obsolete)
- Original Design
- Original Design
Datasheet 3530-00-780-4976
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- End Item Identification [AGAV]
- Singer 144Wsv51 Industrial Sewing Machine
DLA Procurement Analysis 3530-00-780-4976
Management Data 3530-00-780-4976
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3530-00-780-4976
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601
Freight Information 3530-00-780-4976
3530-00-780-4976 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 3530-00-780-4976 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 3530-00-780-4976 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3530-00-780-4976 is not classified as a special type of cargo when transported by water. 3530-00-780-4976 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3530-00-780-4976 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: