3610-00-017-1920

RNVC: 9 | DAC: X 1 Jan 1961 3610-00-017-1916 Spring 33S2RNCC: 3 | RNVC: 9 | DAC: X 1 Jan 1961 3610-00-017-1920

6145-21-627-0360 6145216270360 216270360 is a single metallic conductor of solid, stranded, or tinsel construction, designed to carry current in an electrical circuit. it may be a bare or insulated, may have metalic covering sheath, shield or and additional jacket. refers to bulk quantities only. for items that are solid or stranded, insulated or uninsulated, and have the chemical composition specified but no conductivity (electrical properties) see wire,(as modified), includes litz wire and insulated/uninsulated armored, and ground wire. excludes braid, wire; fuse wire; resistance wire and magnet wire.

Connector5935001629461 001629461 MILC81511-26 An electrical 359-5007-130 M81511-26EB02P1 348-36E14-19S1
M81511/26ED02S1 M81511-26E14-19S1 MILC81511-26 Connector 5935001442327 An electrical fitting 348-36E18
Connector5935001629461 001629461 MILC81511-26 An electrical 359-5007-130 M81511-26EB02P1 348-36E14-19S1

5310-98-201-6416 5310982016416 982016416 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5935-00-636-9894 5935006369894 006369894 is an electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. excludes jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. see also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). for items without inserts, see shell, electrical connector.