Premium Information is available for this item - Upgrade for $1 a day
3695-01-406-5386
Chain Saw
3695014065386 014065386 SAWCVC 1122-011-3073 20 INCH MS661RC-M 20 066MRII/20
A one or two man saw which cuts by means of saw teeth segments which are linked together to form an endless cutting blade. It is used for felling, bucking, trimming, and squaring timber. View more Chain Saw
June 2023
2
Marketplace 3695-01-406-5386
Request a Quotation from participating marketplace vendors
Related Documents 3695-01-406-5386 5+ Documents (More...)
) https//www.nsnlookup.com /fsg-36/fsc-3695/us 3695-01-377-8741 Chain Saw 3695013778741 013778741,SAWCVC
https//www.nsnlookup.com /fsg-36/fsc-3695/us 3695-01-378-4263 Chain Saw 3695013784263 013784263,SAWCVC
Commercial Supplier with the Cage Code 5GNN9 and is tracked by Dun & Bradstreet under DUNS Number 014065386
) https//www.nsnlookup.com /fsg-36/fsc-3695/us 3695-01-377-8741 Chain Saw 3695013778741 013778741,SAWCVC
https//www.nsnlookup.com /fsg-36/fsc-3695/us 3695-01-378-4263 Chain Saw 3695013784263 013784263,SAWCVC
Restrictions 3695-01-406-5386
3695-01-406-5386 is a Chain Saw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3695-01-406-5386
- US Army (A921)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- A182
- US Air Force (FGGG)
- Effective Date:
- 1 May 2006
Approved Sources 3695-01-406-5386
- Part Number
- Manufacturer
- Status
- 1122-011-3073 20 INCH
- Manufacturer
- 9Z575 - Stihl Incorporated (Active)
- Primary Buy
- Primary Buy
- SAWCVC
- 13873 - Dla Aviation Engineering (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS661RC-M 20
- 9Z575 - Stihl Incorporated (Active)
- Secondary Buy
- Secondary Buy
- 066MRII/20
- 9Z575 - Stihl Incorporated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3695-01-406-5386
- Characteristic
- Specifications
- FIIG
- Specifications
- T294-Z
- Drive Method [ARCM]
- Gasoline Engine
- Cylinder Quantity [AAXZ]
- 1
- Engine Type [AZBG]
- 2 Cycle
- Horsepower Rating [ANCY]
- 7.800
- Design Type [APGF]
- One Man
- Frame Type [ALDF]
- Bar
- Cutting Capacity [BZZT]
- 20.000 Inches
- Special Features [FEAT]
- Wrap Handle
DLA Procurement Analysis 3695-01-406-5386
Management Data 3695-01-406-5386
Army
- Materiel Category and Inventory Manager:
- E
- General Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- N
- Nonexpendable item.An item of Army property coded with an ARC of N in the AMDF.Nonexpendable items require property book accountability after issue from the stock record account.Commercial and fabricated items similar to items coded N in the AMDF are considered nonexpendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3695-01-406-5386
Freight Information 3695-01-406-5386
3695-01-406-5386 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133250. A Sub NMFC of Z. It has a NMFC Description of WOOD SAWING MACHS PORTABLE. 3695-01-406-5386 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 67380 which rates the freight between FCL and LCL. 3695-01-406-5386 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3695-01-406-5386 is not classified as a special type of cargo when transported by water. 3695-01-406-5386 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3695-01-406-5386 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: