Premium Information is available for this item - Upgrade for $1 a day
3040-01-181-2052
Remote Control Lever
3040011812052 011812052 1J20-B 1J20
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
May 2023
6
Marketplace 3040-01-181-2052
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-181-2052 5+ Documents (More...)
Restrictions 3040-01-181-2052
3040-01-181-2052 is a Remote Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-181-2052
- US Army (A920)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- A186
- Supplementary Receivers:
- AZ
Approved Sources 3040-01-181-2052
- Part Number
- Manufacturer
- Status
- 1J20-B
- Manufacturer
- 2Y614 - Link-Belt Cranes, L.P., Lllp (Active)
- Primary Buy
- Primary Buy
- 1J20
- 2Y614 - Link-Belt Cranes, L.P., Lllp (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-181-2052
- Characteristic
- Specifications
- FIIG
- Specifications
- A524P0
- Material [MATT]
- Steel
- Style Designator [STYL]
- Offset, One Hole Link End
- Center To Center Distance Between Link And Shaft Holes [BFGW]
- 3.875 Inches Nominal
- Shaft End Thickness [BFGX]
- 3.000 Inches Nominal
- Link End Thickness [BFGY]
- 0.625 Inches Nominal
- Link End Hole Diameter [BFHA]
- 0.625 Inches Nominal
- Shaft Securing Method [CZLP]
- Keyway
- Features Provided [CBBL]
- Keyway
- Keyway Width [ABRR]
- 0.250 Inches Nominal
- Keyway Length [AFYS]
- 3.000 Inches Nominal
- End Item Identification [AGAV]
- 3950-01-110-9224
DLA Procurement Analysis 3040-01-181-2052
Management Data 3040-01-181-2052
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-181-2052
Freight Information 3040-01-181-2052
3040-01-181-2052 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-181-2052 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-181-2052 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-181-2052 is not classified as a special type of cargo when transported by water. 3040-01-181-2052 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-181-2052 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: