Premium Information is available for this item - Upgrade for $1 a day
3825-00-399-5291
Lh Cutter Blade
3825003995291 003995291 1-1000 1-10000 1-2919-1
Managed by United States
NSN Created on 18 Apr 1974
Data Last Changed
May 2023
May 2023
NATO Update Count
5
5
NATO Data Quality
Marketplace 3825-00-399-5291
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3825-00-399-5291 5+ Documents (More...)
https//www.nsnlookup.com
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us
3040-01-453-5598 Straight Shaft 3040014535598 014535598
3040-01-453-5598 3040014535598 014535598 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
4320-01-453-5421 4320014535421 014535421 VANE,STEERING
3040-01-453-5630 3040014535630 014535630 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
https//www.nsnlookup.com
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us
3040-01-453-5572 Straight Shaft 3040014535572 014535572
3040-01-453-5572 3040014535572 014535572 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
https//www.nsnlookup.com
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us
3040-01-453-5621 Straight Shaft 3040014535621 014535621
3040-01-453-5621 3040014535621 014535621 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
Restrictions 3825-00-399-5291
3825-00-399-5291 is a Lh Cutter Blade that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 3825-00-399-5291
- US Navy (N9BZ)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 3825-00-399-5291
- Part Number
- Manufacturer
- Status
- 1-1000
- Manufacturer
- 63117 - Sicard A Division Of Smi-Snowblast (Active)
- Primary Buy
- Primary Buy
- 1-10000
- 63117 - Sicard A Division Of Smi-Snowblast (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1-2919-1
- 63117 - Sicard A Division Of Smi-Snowblast (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3825-00-399-5291
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- General Characteristics Item Description [TEXT]
- Steel,0.375 In. Thk,Flat Cut 176.0 Deg Arc,25.750 In. Inside Radius,30.750 In. Outside Radius,4 Holes 0.5625 In. Dia Spaced 4.000 In. By 2.500 In. Apart Centered 24.0 Deg From Left End,4 Holes 0.5625 In. Dia Spaced 4.000 In. By 2.500 In. Apart Centered 153 Deg,45 Minutes From Left End,Item Double Twisted To 46.250 Effective Lg
DLA Procurement Analysis 3825-00-399-5291
Management Data 3825-00-399-5291
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3825-00-399-5291
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601
Freight Information 3825-00-399-5291
3825-00-399-5291 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 122020. A Sub NMFC of X. It has a NMFC Description of BLADES/CUTTING EDGE GRADER/SCRAPER. 3825-00-399-5291 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 61990 which rates the freight between FCL and LCL. 3825-00-399-5291 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72E for ocean manifesting and military sealift. 3825-00-399-5291 is not classified as a special type of cargo when transported by water. 3825-00-399-5291 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3825-00-399-5291
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 4, corrosion preventive, solvent cutback, cold application, transparent, non-tacky
- --
- --
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3825-00-399-5291 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: