3960-00-475-1321

3040-14-456-5453 3040144565453 144565453 is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or sholders may be machined to accommodate bearings couplings and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to transmit motion see shaft(1), shoulder. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1),straight; and axle(1), straight.

5340-14-456-0510 5340144560510 144560510 is a metallic or nonmetallic item which is rigid, flat and generally smooth. its thickness is small in comparison to its length and width. it is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. see support, as modified. do not use if a more specific name applies.

3040-14-456-5452 3040144565452 144565452 is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or sholders may be machined to accommodate bearings couplings and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to transmit motion see shaft(1), shoulder. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1),straight; and axle(1), straight.

CAGE 2M417 Workshop Inc in ,

5998-01-288-0269 5998012880269 012880269 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar