4320-99-277-5456

Assembly 50.0185.9912RNCC: 3 | RNVC: 2 | DAC: 40.0152.9912RNCC: 6 | RNVC: 9 | DAC: 9 25 Apr 1991 4320-99-277-5456

4730-14-341-0462 4730143410462 143410462 is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. the cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. this firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.

2 25 Apr 1991 5310-98-200-8013 Tube Coupling Nut E 844RNCC: 5 | RNVC: 2 | DAC: 9 26 Jan 1987 4320-99-277-5456

5310-34-038-6029 5310340386029 340386029 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5975-17-114-2134 5975171142134 171142134 is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. may include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).