4330-00-111-7114

5310-01-485-3337 5310014853337 014853337 is a nut having a flat bottom and 6 sides. an integral feature is incorporated for locking on the threads of a mating member. excludes nut (1), self-locking, cap.

6515-14-201-8834 6515142018834 142018834 is excludes forceps, serrefine.

instructions how to enable JavaScript in your web browser . 7435-14-500-2802Accu V2lc7435145002802 145002802 50345-1

5365-99-900-9597 5365999009597 999009597 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

9505-66-081-4075 9505660814075 660814075 is a ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. the rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. for dimensions greater than above, see bar, metal. excludes items having electrical resistivity or conductivity ratings.