Premium Information is available for this item - Upgrade for $1 a day
4710-01-333-5995
Metallic Bent Tube
4710013335995 013335995 5578481-R 5578481 12340342-5 4710PL0809677 12340342
A bent hollow item, welded or seamless. It has a round, square or any other cross section, with a continuous periphery. It is primarily designed to convey fluids, gases and/or semisolids. Excludes items of circular cross section which conform in dimensional characteristics to PIPE, METALLIC; ELBOW, PIPE; ELBOW, TUBE; BEND, ELECTRICAL CONDUIT; BEND, PIPE, RETURN; and BEND, TUBE, RETURN. For items with end fittings on one or both ends, see TUBE ASSEMBLY, METAL. View more Metallic Bent Tube
November 2023
14
Marketplace 4710-01-333-5995
Request a Quotation from participating marketplace vendors
Related Documents 4710-01-333-5995 5+ Documents (More...)
-5 4710-01-333-5995 277 42 19207 12340342-64710-01-335-7523 277 15 19207 12340346 2590-01-189-9734 https
-4 277 16 19207 12340342-5 4710-01-333-5995 277 42 19207 12340342-64710-01-335-7523 277 15 19207 12340346
-1 4710-01-192-6113 277 42 19207 12340342-2 4710-01-192-9720 277 15 19207 12340342-3 277 43 19207 12340342
-4 277 16 19207 12340342-5 4710-01-333-5995 277 42 19207 12340342-6 4710-01-335-7523 277 15 19207 12340346
-3 196D 43 19207 12340342-4 196D 16 19207 12340342-5 4710-01-333-5995 196D 42 9C234 12340342-6 4710-01
-5 4710-01-333-5995 277 42 19207 12340342-6 4710-01-335-7523 277 15 19207 12340346 2590-01-189-9734 https
01-249-1586 Vehicle Hatch Door 2510012491586 012491586 Tools Volume 2 Page 894 5995 277 42 19207 12340342
2540014773686 TM-9-2320-280-24P HMMWV Repair Parts And Tools Volume 2 Page 894 1585 272 1 19207 12340342
2510012491585 012491585 19207 12340338 2540-01-192-5937 277 41 19207 12340340 2510-01-249-1585 272 1 19207 12340342
Restrictions 4710-01-333-5995
4710-01-333-5995 is a Metallic Bent Tube that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4710-01-333-5995
- US Army (A920)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FXGC)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXAX
- US Marine Corps (MC40)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Apr 2012
- Canada (ZC01)
- Effective Date:
- 1 Apr 2013
- Portugal (ZP01)
- Effective Date:
- 1 Mar 2014
Approved Sources 4710-01-333-5995
- Part Number
- Manufacturer
- Status
- 12340342-5
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 12340342-5
- 34623 - Am General Llc (Active)
- Secondary Buy
- Secondary Buy
- 4710PL0809677
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
- 5578481-R
- 34623 - Am General Llc (Active)
- Advisory Reference
- Advisory Reference
- 5578481
- 34623 - Am General Llc (Active)
- Advisory Reference
- Advisory Reference
- 12340342
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 4710-01-333-5995
- Characteristic
- Specifications
- FIIG
- Specifications
- A004A0
- End Item Identification [AGAV]
- 2320-01-107-7153
- Construction [CQCF]
- Seamless
- Cross-Sectional Shape Style [AAGR]
- Plain Round
- Diameter [ABMZ]
- 2.000 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- T6 Assn Std Single Material Response
- Material [MATT]
- Aluminum Alloy 6061
- Second End Relationship With First End [CQBB]
- Identical
- Special Features [FEAT]
- Connection Block On The End
- Wall Thickness [AAGT]
- 0.250 Inches Nominal
Weapon Systems (WSDC) 4710-01-333-5995
DLA Procurement Analysis 4710-01-333-5995
- Last Stock Position:
- 25 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4710-01-333-5995
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- AY
- Subscribe
- 1
- AY
- Oct 2021
- Defense Logistics Agency (DS)
- AY
- Subscribe
- 1
- AY
- Jan 2021
- Defense Logistics Agency (DS)
- AY
- Subscribe
- 1
- AY
- Oct 2019
- Department of the Army (DA)
- AY
- Subscribe
- 1
- AY
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- US Marine Corps (DM)
- M
- 0
- Reversal Of Phrase Code Z 4710-01-192-6113
- 0
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 4710-01-333-5995
Freight Information 4710-01-333-5995
4710-01-333-5995 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 4710-01-333-5995 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 4710-01-333-5995 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 4710-01-333-5995 is not classified as a special type of cargo when transported by water. 4710-01-333-5995 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4710-01-333-5995
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 4710-01-333-5995 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: